Below you can download impresora hp laserjet 1018 windows 10 64 bits driver for Windows.
File name: impresora-hp-laserjet1018_win1064-bits.exe
Version: 6.995
File size: 15.66 MB
Upload source: other website
Antivirus software passed: Panda ver. 1.87
Driver Impresora Hp Laserjet 1018 Windows 10 64 Bits(click above to download)
Device Specification:
- Type: Laser printer
- Brand: HP
- Model: LaserJet 1018
- Compatibility: Windows 10 (64-bit)
- Printing Technology: Laser
- Print Speed: Up to 12 ppm
- Resolution: Up to 600 x 600 dpi
- Memory: 2 MB
- Paper Handling: 150-sheet input tray, 100-sheet output tray
- Connectivity: USB 2.0
Troubleshooting Questions and Answers:
1. Q: Why is my HP LaserJet 1018 printer not responding?
A: There could be several reasons for this issue. Please try these troubleshooting steps:
- Ensure the printer is turned on and connected to the computer properly via USB.
- Check if the printer driver is installed correctly. If not, install the correct driver for Windows 10 (64-bit) from the official HP website.
- Restart both the printer and the computer.
- If the problem persists, try connecting the printer to a different USB port on your computer.
2. Q: How can I resolve paper jams in my HP LaserJet 1018 printer?
A: Follow these steps to troubleshoot paper jams:
- Turn off the printer and disconnect the power cord.
- Open the rear access door and remove any jammed paper carefully.
- Check the input tray for any stuck or crumpled paper and remove it.
- Make sure the paper guides in the input tray are properly aligned.
- Reattach the rear access door securely, plug in the power cord, and turn on the printer.
- Try printing again. If the issue persists, refer to the user manual for further assistance.
3. Q: Why is my HP LaserJet 1018 printer printing blank pages?
A: If your printer is only producing blank pages, consider these troubleshooting steps:
- Ensure that there is sufficient ink or toner in the printer cartridges.
- Check if the cartridges are properly installed and not empty or dried out.
- Verify that the printer settings have the correct paper size and media type selected.
- Clean the print heads using the printer's maintenance tools or utility.
- If the problem persists, try printing a test page or performing a printer self-test to isolate the issue further.