Below you can download dpp fp30 driver for Windows.
File name: dpp-fp30.exe
Version: 9.775
File size: 44901 MB
Upload source: manufactuter website
Antivirus software passed: AVG v. 5.88
Driver Dpp Fp30(click above to download)
Printed Photo
Specifications:
- Printer type: Dye-sublimation thermal transfer printing system
- Print resolution: 300 × 300 dpi
- Image quality modes: Standard, Fine, Super Fine
- Print sizes: Postcard size (4 x 6 inches)
- Printing speed: Approx. 56 seconds per print
- Interface: USB 2.0
- Paper tray capacity: 25 sheets
- Power supply: AC 100V to 240V, 50 / 60Hz
- Dimensions (W x D x H): 6.7 x 4.5 x 2.4 inches
- Weight: Approx. 1.8 lbs
Troubleshooting Questions and Answers:
1. Q: The printer isn't responding when I try to print. What could be the issue?
A: Firstly, ensure that the printer is connected to the power source and turned on. Check if the USB cable is properly connected to both the printer and your device. Also, make sure the printer driver is correctly installed on your computer.
2. Q: The printed photos have streaks or lines across them. What should I do?
A: If the printed photos have streaks or lines, it might be due to a dirty print head. Try cleaning the print head using the provided cleaning sheet. Additionally, make sure the paper used is not wrinkled or damaged, as this can also cause printing issues.
3. Q: The print quality is not satisfactory, and the colors appear faded or distorted. How can I fix this?
A: Poor print quality and faded/distorted colors can be resolved by adjusting the print quality settings. Ensure that you have selected the appropriate image quality mode (Standard, Fine, or Super Fine) for your printing requirements. Moreover, check if the ink ribbon has sufficient ink left, and replace it if necessary.