Below you can download conexao internet windows 7 driver for Windows.
File name: conexao-internet_win7.exe
Version: 5.611
File size: 30195 MB
Upload source: original install disk
Antivirus software passed: Kaspersky version 5.39
Driver Conexao Internet Windows 7(click above to download)
Forum post:
Device Specification:
Model: Konica Minolta 190F
Type: Monochrome Laser Printer
Dimensions: 15.6 x 14.3 x 10.4 inches
Weight: 20.3 lbs.
Print Speed: Up to 19 pages per minute
Print Resolution: 1200 x 1200 dpi
Input Capacity: 250 sheets
Monthly Duty Cycle: 10,000 pages
Interface: USB 2.0, Ethernet
Operating Systems: Windows, Mac, Linux
Power Consumption: 340 watts (during operation), 55 watts (standby), 10 watts (power-saving mode)
First Print Out Time: 10.5 seconds
Troubleshooting Questions and Answers:
1. Q: Why is my Konica Minolta 190F not printing or responding?
A: First, check if the printer is powered on and connected properly to the computer. Make sure there are no error messages on the printer's display panel. If it's still not working, try restarting both the printer and the computer. If the issue persists, check if the printer has sufficient ink or toner. If necessary, replace the cartridge.
2. Q: How can I improve the print quality of my Konica Minolta 190F?
A: If you're experiencing poor print quality, start by checking the toner cartridge. Ensure it is properly installed and has sufficient toner. Also, check if the print density settings are appropriate for your requirements. If needed, adjust the print density through the printer's control panel or software. Additionally, consider cleaning the printer's drum unit and other internal parts according to the manufacturer's instructions.
3. Q: My Konica Minolta 190F frequently jams paper. What should I do?
A: Paper jams can occur due to various reasons. Firstly, make sure you're using the correct paper size and type that is compatible with the printer. Check for any obstructions inside the paper path and remove them carefully. Ensure the paper trays are loaded with the correct paper alignment, not exceeding the maximum capacity. Also, inspect the paper feeding rollers for any dust or debris and clean them if necessary. If the issue persists, refer to the printer's user manual for further troubleshooting steps.
Note: These troubleshooting answers are based on general knowledge and may not address all specific issues related to the Konica Minolta 190F printer. It's advisable to consult the printer's