Below you can download zebra gk420d windows 7 64 bit driver for Windows.
File name: zebra-gk420d_win764-bit.exe
Version: 4.947
File size: 28307 MB
Upload source: manufactuter website
Antivirus software passed: McAfee v. 5.96
Zebra Gk420D Driver Download Windows 7 64 Bit(click above to download)
Device Specification:
- Device Name: Zebra GK420D
- Operating System Support: Windows 7 64-bit
- Connectivity: USB
- Print Method: Direct Thermal
- Max Print Width: 4.09 inches (104 mm)
- Max Print Speed: 5 inches per second (127 mm/s)
- Resolution: 203 dpi (8 dots/mm)
- Memory: 8 MB Flash; 8 MB SDRAM
- Media Types: Roll-fed or fan-fold, die-cut or continuous direct thermal labels with or without black line, tag stock, continuous receipt paper, and wristbands
- Media Handling: OpenACCESSâ„¢ for easy media and ribbon loading, tear bar for easy tear-off of labels and receipts, 2:1 media roll to ribbon ratio for easy media and ribbon changes, user-installable connectivity options and accessories
Troubleshooting Questions and Answers:
1. Q: The printer is not responding when I try to print. What could be the issue?
A: There are a few possible reasons for this issue. Ensure that the printer is properly connected to the computer via the USB cable. Additionally, check if the Zebra GK420D driver is installed correctly in your Windows 7 64-bit system. If not, you can download the driver from the official Zebra website and install it.
2. Q: I'm experiencing poor print quality with the Zebra GK420D. How can I improve it?
A: Several factors can affect print quality. Begin by inspecting the printhead and cleaning it if necessary. Make sure you are using high-quality direct thermal media that is compatible with the printer. Adjusting the darkness or heat settings in the driver may also improve print quality. Lastly, ensure that the label or tag stock is correctly loaded and positioned in the printer.
3. Q: The labels are not feeding properly through the Zebra GK420D. What should I do?
A: If you are facing feeding issues, start by checking the label or tag stock for jams or misalignment. Ensure that the media is loaded correctly and that the adjustable media guides are properly aligned. Clean the printer's paper path, including the feed roller, with a lint-free cloth. If the problem persists, recalibrate the printer to ensure it detects the correct media length and width. Instructions for recalibration can be found in the printer's manual or on the Zebra website.