Download Drivers

I recently upgraded my operating system to Windows 10 and I am having trouble finding the Arduino Uno USB driver for this version. I have searched extensively on the official Arduino website and even browsed through various forums, but so far, I haven't been able to locate the specific driver I need. Could someone please provide a reliable link or direct me to a trustworthy source where I can download the Arduino Uno USB driver compatible with Windows 10? I would greatly appreciate any assistance.

Below you can download arduino uno usb windows 10 driver for Windows.

File name: arduino-uno-usb_win10.exe
Version: 8.394
File size: 31625 MB
Upload source: manufactuter website
Antivirus software passed: G Data v. 4.73

Arduino Uno Usb Driver Windows 10

(click above to download)


Device Specification:

- Name: Arduino Uno
- Supported Operating System: Windows 10
- Connectivity: USB interface
- Microcontroller: Atmel ATmega328P
- Clock Speed: 16 MHz
- Digital I/O Pins: 14
- Analog Input Pins: 6
- Flash Memory: 32 KB (ATmega328P)
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)

Troubleshooting Questions and Answers:

1. Q: Why is my Arduino Uno not being recognized by my Windows 10 computer?
A: There can be several reasons for this. First, ensure that you have installed the Arduino Uno USB driver specific to Windows 10. Also, check if the USB cable is properly connected between the Arduino Uno and the computer. Try using a different USB port or cable and restart your computer. If the issue persists, check if the Arduino Uno is receiving power and the board itself is functioning correctly.

2. Q: My Arduino Uno is not uploading sketches. What could be the problem?
A: There are a few potential reasons for this issue. Firstly, verify that you have selected the correct board and port settings in the Arduino IDE. Ensure that the USB cable is securely connected and not faulty. In some cases, a change in the USB port or restarting the computer might help. If the problem persists, check if any conflicting software or antivirus/firewall is causing interference with the upload process.

3. Q: Why is my Arduino Uno not responding to my code inputs?
A: There could be several causes for this behavior. Firstly, check if the code is correctly written and uploaded to the Arduino Uno. Ensure that the correct pins are being used for the desired inputs. Verify that the external components, if any, required by your code are properly connected. If there are no apparent issues with the code or connections, try resetting the Arduino Uno by momentarily shorting the reset pin to the ground and then re-uploading the code.

Thank you so much for sharing the link to the working Windows driver for the Arduino Uno USB! I've been searching for this for quite some time, and I really appreciate your help.