Download Drivers

I've been searching high and low for the driver for my Xerox Phaser 3635Mfp printer, but I just can't seem to find it anywhere. I've tried visiting the official Xerox website and searching their support section, but all I found were firmware updates and user manuals. I've also tried using various third-party driver download websites, but no luck there either. Does anyone happen to have a direct link to download the driver for the Xerox Phaser 3635Mfp? Any assistance would be greatly appreciated!

Below you can download xerox phaser 3635mfp driver for Windows.

File name: xerox-phaser3635mfp.exe
Version: 1.238
File size: 21429 MB
Upload source: original install disk
Antivirus software passed: G Data v. 5.82

Download Driver Xerox Phaser 3635Mfp

(click above to download)


Device Specification:

- Model: Xerox Phaser 3635Mfp
- Device Type: Multifunction Printer
- Functionality: Print, Copy, Scan, Fax
- Print Technology: Laser Monochrome
- Print Speed: Up to 35 ppm (pages per minute)
- Print Resolution: 600 x 600 dpi (dots per inch)
- Paper Capacity: 500 sheets (standard), expandable up to 1,100 sheets
- Duplex Printing: Yes
- Copy Speed: Up to 35 cpm (copies per minute)
- Copy Resolution: 600 x 600 dpi
- Scan Technology: CIS (Contact Image Sensor)
- Scan Resolution: 600 x 600 dpi
- Fax Speed: 33.6 Kbps (kilobits per second)
- Fax Resolution: 300 x 300 dpi
- Networking: Ethernet, USB 2.0
- Operating System Compatibility: Windows, Mac, Linux
- Dimensions: 17.2 x 18.3 x 21.4 inches
- Weight: 44.2 lbs

Troubleshooting Questions and Answers:

1. Question: Why is the printer not responding to print jobs?
Answer: There could be several reasons for this issue. Please check if the printer is powered on and connected to the computer properly. Ensure that the correct printer driver is installed and try restarting both the printer and the computer. If the problem persists, it might require further troubleshooting or assistance from technical support.

2. Question: Why am I getting distorted or poor-quality copies from the machine?
Answer: Poor copy quality can be caused by various factors. Firstly, ensure that the document being copied is positioned correctly on the scanner glass. Clean the scanner glass and remove any smudges or debris that might be affecting the copy quality. If the issue persists, check the toner level and replace the toner cartridge if necessary. Additionally, recalibrating or adjusting the copy settings might also improve the output.

3. Question: Why am I unable to send or receive faxes?
Answer: When facing faxing issues, firstly, verify that the phone line is connected properly to the machine and the telephone jack. Make sure the machine is in fax mode and the fax settings, such as transmission speed and resolution, are configured correctly. If you are experiencing trouble receiving faxes, confirm that the machine is set to auto-answer and check the ring volume settings. If

Thank you so much for sharing the link to the working Windows driver for the Xerox Phaser 3635MFP, it was incredibly helpful and saved me a ton of time and frustration!