Below you can download zebra gk420d zpl driver for Windows.
File name: zebra-gk420d-zpl.exe
Version: 6.245
File size: 18.69 MB
Upload source: original install disk
Antivirus software passed: McAfee 5.98
Zebra Gk420D Zpl Driver Download(click above to download)
Device Specification:
- Device Name: Zebra GK420D
- Driver Type: ZPL (Zebra Programming Language)
- Connectivity: USB, Serial, Parallel, Ethernet (optional)
- Resolution: 203 dpi (dots per inch)
- Print Width: 4.09 inches
- Print Speed: Up to 5 inches per second
- Supported Media Types: Roll-fed or Fanfold, Direct Thermal labels with black mark sensing
- Compatibility: Windows, Mac, Linux
Troubleshooting Questions and Answers:
Q1: Why is my Zebra GK420D not printing anything?
A1: There could be several reasons for this issue. Please check the following:
- Ensure that the printer is powered on and connected properly to the computer.
- Make sure that the correct driver is installed on your computer.
- Verify that the labels or media are correctly loaded and properly aligned in the printer.
Q2: Why does my Zebra GK420D produce poor print quality?
A2: If you are experiencing poor print quality, please consider the following:
- Check if the printhead is clean. Clean it using an approved cleaning solution or a soft, lint-free cloth.
- Verify that the label or media is correctly loaded and not damaged.
- Adjust the darkness or print speed settings in the printer driver to improve print quality.
Q3: How can I troubleshoot label feeding issues with my Zebra GK420D?
A3: If you are having problems with label feeding, try the following:
- Ensure that the labels are correctly loaded in the label roll holder and that the media is aligned properly.
- Check if the label sensors are clean and not obstructed.
- Adjust the label width and label length settings in the printer driver to match the actual media dimensions.