Below you can download kyocera fs-c5350dn driver for Windows.
File name: kyocera-fs-c5350dn.exe
Version: 4.881
File size: 18.82 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky ver. 3.50
Download Driver Kyocera Fs-C5350Dn(click above to download)
Forum Post:
Device Specification - Kyocera FS-C5350DN:
- Print Technology: Laser
- Print Speed: Up to 32 pages per minute (A4)
- Resolution: 600 x 600 dpi, 9,600 x 600 dpi (multi-bit)
- Connectivity: USB, Ethernet
- Duplex Printing: Yes
- Paper Capacity: Standard 500-sheet universal cassette, 150-sheet multi-purpose tray
- Monthly Duty Cycle: 100,000 pages per month
- Supported Operating Systems: Windows, Mac, Linux
Troubleshooting Questions and Answers:
Q1: Why is my Kyocera FS-C5350DN not printing at all?
A1: Ensure that the printer is properly connected to the power source and turned on. Check if there are any error messages displayed on the printer's control panel. Also, verify if the printer driver is installed correctly on your computer.
Q2: How can I resolve paper jams in my Kyocera FS-C5350DN?
A2: Firstly, turn off and unplug the printer, then carefully remove any jammed paper by following the instructions provided in the printer's user manual. Ensure that there are no torn pieces of paper left inside the printer. Once cleared, reinsert the paper correctly and resume printing.
Q3: Why does my Kyocera FS-C5350DN produce blurry prints?
A3: Blurry prints may occur due to various reasons. Check if the printer's print resolution is set to the desired level. Additionally, make sure the toner cartridges are properly seated and not empty or low on toner. If the issue persists, clean the printer's drum unit and perform a calibration process to improve print quality.