Below you can download zebra gc420t windows 10 driver for Windows.
File name: zebra-gc420t_win10.exe
Version: 9.938
File size: 44354 MB
Upload source: original install disk
Antivirus software passed: F-Secure v 3.1
Download Driver Zebra Gc420T Windows 10(click above to download)
Device Specification:
- Device Name: Zebra GC420T
- Operating System: Windows 10
- Connectivity: USB, Serial, Parallel
- Print Method: Direct Thermal, Thermal Transfer
- Maximum Print Speed: 4 inches per second
- Print Resolution: 203 dpi (8 dots/mm)
- Maximum Label and Liner Width: 4.25 inches (108 mm)
- Maximum Label and Liner Length: 39 inches (991 mm)
- Memory: 8 MB SDRAM, 8 MB Flash
- Power Source: External universal power supply or DC connector
- Dimensions: 7.9" x 7.6" x 10" (200 mm x 194 mm x 254 mm)
- Weight: 3.2 lbs (1.5 kg)
Troubleshooting Questions and Answers:
1. Q: Why is the Zebra GC420T not printing anything?
A: Ensure that the label roll is properly loaded and centered. Confirm that the printer driver is installed correctly on your Windows 10. Check for any error messages on the printer display and follow the recommended actions in the user manual.
2. Q: How can I resolve barcode scanning issues with the Zebra GC420T?
A: Ensure that the barcode on the label is aligned properly and not damaged. Clean the printhead and the label path to enhance barcode readability. Ensure that the barcode symbology is supported by the printer and that the scanner is set to read the correct symbology.
3. Q: The Zebra GC420T is showing a "Paper Out" error, how can this be fixed?
A: Verify that the media is loaded correctly and that there is enough label stock for printing. Ensure that the media sensors are clean and not obstructed. If the error persists, calibrate the media sensors using the printer's control panel or software.
Remember to consult the device's user manual or Zebra's support resources for detailed troubleshooting steps specific to your situation.