Below you can download of tl-wn725n driver for Windows.
File name: of-tl-wn725n.exe
Version: 9.654
File size: 17930 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v 1.64
Download Driver Of Tl-Wn725N(click above to download)
Device specification:
- Model: TL-WN725N
- Interface: USB 2.0
- Wireless Standards: IEEE 802.11b/g/n
- Frequency: 2.400 - 2.4835 GHz
- Signal Rate: Up to 150Mbps
- Security: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption
- Operating System Compatibility: Windows (XP/Vista/7/8/8.1/10), Mac OS X (10.7/10.8/10.9/10.10/10.11/10.12/10.13/10.14/10.15), Linux
Troubleshooting Questions:
1. Why is my TL-WN725N not connecting to any wireless networks?
Answer: There could be several reasons for this issue. Make sure the TL-WN725N is properly inserted into the USB port and the driver is successfully installed. Check if the wireless network adapter is enabled in your device's network settings. Also, ensure that the Wi-Fi router is powered on and broadcasting a network. If the problem persists, try restarting both your device and the router, as well as updating the driver to the latest version.
2. My TL-WN725N's signal strength is weak. How can I improve it?
Answer: If you're experiencing weak signal strength, try the following troubleshooting steps. Firstly, make sure the device is in a location that is relatively close to the wireless router. Obstructions such as walls or large objects can weaken the signal, so consider moving the TL-WN725N to a more open space. Additionally, try adjusting the antenna position to find the best reception. Finally, updating the firmware and driver for the TL-WN725N to their latest versions might also help improve the signal strength.
3. Why is my TL-WN725N not recognized by my computer after updating the operating system?
Answer: After an operating system update, the driver for the TL-WN725N may become incompatible or outdated. To resolve this issue, visit the official TP-Link website and download the latest driver specifically designed for your updated operating system. Install the new driver and make sure to follow any provided instructions for a successful installation. Once the driver is installed, restart your computer, and the TL-WN725N should be recognized and function correctly.