Below you can download usb to serial uc232a windows 10 driver for Windows.
File name: usb-to-serial-uc232a_win10.exe
Version: 8.668
File size: 16.49 MB
Upload source: manufactuter website
Antivirus software passed: McAfee 1.91
Usb To Serial Uc232A Driver Windows 10(click above to download)
Device Specification:
Model: Sound Blaster SB1095
Compatibility: Windows 10
Interface: USB
Audio Connectivity: 3.5mm audio output, microphone input
Supported Audio Formats: PCM, Dolby Digital Live, DTS
Signal-to-Noise Ratio (SNR): 100dB
Max Sampling Rate: 96 kHz
Supported Headphone Impedance: 16-100 ohms
Audio Technologies: SBX Pro Studio, CrystalVoice, Scout Mode
Dimensions: Approx. 7.6 x 4.4 x 1.4 cm
Weight: Approx. 30 grams
Troubleshooting Questions and Answers:
1. Q: Why is there no sound coming from the Sound Blaster SB1095?
A: Please ensure that the device is properly connected to the computer's USB port. Check if the volume is muted or set to a low level. Try plugging in your headphones or speakers to a different audio output on the device and test if sound is produced.
2. Q: Why is the Sound Blaster SB1095 not recognized by Windows 10?
A: Make sure that you have installed the correct driver for the Sound Blaster SB1095. Visit the manufacturer's website and ensure that you have downloaded and installed the latest driver compatible with Windows 10. Try connecting the device to a different USB port on your computer.
3. Q: Why is there distortion or static noise in the audio output of the Sound Blaster SB1095?
A: Check if the audio cables are securely connected to the device and the audio output. Make sure that the audio output level is not too high, which can cause distortion. Verify if the issue persists with different headphones or speakers. If possible, try using the Sound Blaster SB1095 on another computer to identify if the problem lies with the device itself.