Below you can download brother dcp-j100 windows 8 driver for Windows.
File name: brother-dcp-j100_win8.exe
Version: 4.482
File size: 15.93 MB
Upload source: original install disk
Antivirus software passed: AVG v 2.79
Download Driver Brother Dcp-J100 Windows 8(click above to download)
Device Specification:
- Device model: Brother DCP-J100
- Supported operating system: Windows 8
- Functionality: Print, scan, and copy
- Print technology: Inkjet
- Print resolution: Up to 1200 x 6000 dpi
- Print speed: Up to 27 ppm (pages per minute) in monochrome and color
- Paper capacity: 100 sheets
- Paper sizes: A4, Letter, Legal, Executive, A5, A6, Envelopes (Com-10, DL, C5, Monarch)
- Scan resolution: Up to 1200 x 2400 dpi
- Scan types: Flatbed
- Copy resolution: Up to 1200 x 1200 dpi
- Copy speed: Up to 5.6 ppm (pages per minute) in monochrome and color
- Connectivity: USB 2.0
Troubleshooting Questions and Answers:
1. Question: Why is my Brother DCP-J100 not printing?
Answer: Please ensure that the printer's power cable is connected properly and turned on. Check if the printer has any error messages displayed on its control panel. Verify that the printer driver is installed correctly on your Windows 8 computer. If the issue persists, try restarting the printer and your computer. If the problem still persists, consult the printer's user manual or contact Brother's customer support for further assistance.
2. Question: I am unable to scan documents using my Brother DCP-J100. What could be the problem?
Answer: Make sure that the scanner is properly connected to your Windows 8 computer via USB cable. Check if the scanner driver is installed correctly. Verify that the scanner lid is closed securely before initiating the scan. Ensure that the correct scanning settings are selected on the printer's control panel or scanning software. If the problem continues, restart both the scanner and your computer. If the issue persists, refer to the user manual or reach out to Brother's customer support for further guidance.
3. Question: My Brother DCP-J100 is not making copies. How can I resolve this issue?
Answer: Firstly, ensure that the printer is powered on and not displaying any error messages. Make sure that the paper is loaded properly in the paper tray and not jammed. Clean the scanner glass and lid to remove any dirt or debris that may interfere with the copying process. If the copies are coming out blank, check the ink levels