Below you can download ugreen rs232 windows 10 driver for Windows.
File name: ugreen-rs232_win10.exe
Version: 9.888
File size: 19360 MB
Upload source: original install disk
Antivirus software passed: Norton v 1.86
Ugreen Rs232 Driver Windows 10(click above to download)
Forum Post Title: Ugreen RS232 Driver for Windows 10 - Specs and Troubleshooting Questions
Specifications:
- Device Model: Ugreen RS232 Driver
- Compatibility: Windows 10
- Connectivity: RS232
- Manufacturer: Ugreen
- Operating System Compatibility: Windows 10 (32-bit and 64-bit)
- Supported Protocols: RS232, UART
- Data Transfer Rate: Up to 1 Mbps
- Connector Type: Male RS232 DB9, USB Type-A
- Cable Length: 1.5 meters
- Material: PVC Jacket, Copper Wire
- Plug and Play: Yes
- Driver Required: Yes, included with the device or can be downloaded from the Ugreen website
- Dimensions: 5.7 x 1.2 x 0.8 inches (14.5 x 3 x 2 cm)
- Weight: 1.6 ounces (45 grams)
Troubleshooting Questions and Answers:
Question 1: I've connected the Ugreen RS232 Driver to my Windows 10 PC, but it is not being recognized. What should I do?
Answer 1: If the device is not being recognized, ensure that you have installed the necessary driver provided by Ugreen. You can download the driver from their official website. Install the driver and restart your PC. If the issue persists, try connecting the device to a different USB port or contact Ugreen support for further assistance.
Question 2: I'm experiencing slow data transfer rates with the Ugreen RS232 Driver on Windows 10. What could be the problem?
Answer 2: Slow data transfer rates might indicate a compatibility issue or a problem with the driver installation. Make sure you have installed the correct driver for Windows 10 and check if there are any available updates for the driver. Additionally, try using a different USB port on your PC and ensure that the RS232 cable is securely connected. If the problem persists, contact Ugreen support for further troubleshooting.
Question 3: My Ugreen RS232 Driver is not establishing a connection with the RS232 device. What could be causing this issue?
Answer 3: If the device is not establishing a connection, first ensure that the RS232 device is powered on and properly connected to the Ugreen RS232 Driver. Check if the RS232 cable is securely plugged into both devices. If the connection issue persists, try using a different RS232 cable or test the RS232 device with