Below you can download zebra printer windows 10 driver for Windows.
File name: zebra-printer_win10.exe
Version: 2.671
File size: 34335 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 1.97
Zebra Printer Driver Windows 10 Download(click above to download)
Device Specification:
- Device name: Zebra Printer
- Compatibility: Windows 10
- Connection: USB
- Print resolution: 203 dpi
- Print speed: Up to 4 inches per second
- Print width: 4.09 inches
- Memory: 8 MB SDRAM, 4 MB Flash
- Printing technology: Direct thermal
- Label sensor type: Transmissive and reflective sensing
- Operating temperature: 40°F to 105°F (4°C to 41°C)
- Dimensions: 7.5" x 10.2" x 8.75" (H x W x D)
- Weight: 3.7 lbs
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra Printer not printing labels?
A: First, check if the label roll is properly loaded and hasn't run out. Ensure that the label sensor is clean and unobstructed. Additionally, verify that the correct label size and media type are selected in the printer settings.
2. Q: How do I resolve a paper jam in my Zebra Printer?
A: To clear a paper jam, turn off the printer and open the cover. Gently pull out any stuck labels or paper, ensuring no torn pieces remain. Close the cover, power on the printer, and perform a calibration. If the issue persists, contact Zebra support for further assistance.
3. Q: Why is my Zebra Printer not recognized by my Windows 10 computer?
A: Begin troubleshooting by checking the USB cable connections, making sure they are securely connected on both ends. Try using a different USB port or cable to rule out any issues. Ensure that the Zebra Printer Driver is correctly installed on your computer. If the problem persists, contact Zebra customer support for guidance.