Download Driver Zebra Li4278
Download Driver Zebra Li4278
Hi there! I've been searching all over the internet, but I'm unable to find a reliable download link for the driver of the Zebra Li4278 device. I've checked Zebra's official website, various driver update websites, and even tried to search for it using different search engines, but unfortunately, I haven't had any luck so far. Could someone kindly provide me with a direct link to download the driver for the Zebra Li4278? Any assistance would be greatly appreciated. Thank you!
Re: Download Driver Zebra Li4278
Below you can download zebra li4278 driver for Windows.
File name: zebra-li4278.exe
Version: 8.559
File size: 44471 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 4.65
Download Driver Zebra Li4278
(click above to download)
Forum Post:
Device Specification:
Model: Zebra Li4278
Type: Wireless Barcode Scanner
Connectivity: Bluetooth
Range: Up to 100 meters (Line of Sight)
Battery: Rechargeable Lithium-ion
Battery Life: Up to 72 hours on a single charge
Interface: USB
Scan Rate: 547 scans per second
Scan Angle: Horizontal: 35°; Vertical: 65°
Operating Temperature: -40°C to 50°C
Dimensions: 7.34 in. H x 2.75 in. W x 3.84 in. D
Weight: 5.29 oz (150 gm)
Supported Operating Systems: Windows, iOS, Android
Troubleshooting Questions and Answers:
1. Q: The Zebra Li4278 is not connecting to my computer. What can I do?
A: Ensure that the device is charged and turned on. Check if the Bluetooth is enabled on both the scanner and the computer. Try re-pairing the device with your computer by following the pairing instructions in the user manual.
2. Q: My Zebra Li4278 barcode scans are not registering on my computer. How can I fix this issue?
A: Make sure the scanner is in the correct mode and set to the appropriate interface (USB in this case). Check if the drivers are installed correctly on your computer. Restart your computer and scanner, and try scanning again.
3. Q: The battery of my Zebra Li4278 drains quickly. What should I do?
A: Firstly, consider replacing the battery if it is old or damaged. Make sure to charge the battery fully before use. If the issue persists, reduce unnecessary scanning and implement power-saving settings such as turning off Bluetooth when not in use. Contact Zebra customer support for further assistance if needed.
Please note that these troubleshooting steps are general recommendations, and it is advisable to refer to the product manual or Zebra's support resources for detailed instructions specific to your device and situation.
File name: zebra-li4278.exe
Version: 8.559
File size: 44471 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 4.65
Download Driver Zebra Li4278
(click above to download)
Forum Post:
Device Specification:
Model: Zebra Li4278
Type: Wireless Barcode Scanner
Connectivity: Bluetooth
Range: Up to 100 meters (Line of Sight)
Battery: Rechargeable Lithium-ion
Battery Life: Up to 72 hours on a single charge
Interface: USB
Scan Rate: 547 scans per second
Scan Angle: Horizontal: 35°; Vertical: 65°
Operating Temperature: -40°C to 50°C
Dimensions: 7.34 in. H x 2.75 in. W x 3.84 in. D
Weight: 5.29 oz (150 gm)
Supported Operating Systems: Windows, iOS, Android
Troubleshooting Questions and Answers:
1. Q: The Zebra Li4278 is not connecting to my computer. What can I do?
A: Ensure that the device is charged and turned on. Check if the Bluetooth is enabled on both the scanner and the computer. Try re-pairing the device with your computer by following the pairing instructions in the user manual.
2. Q: My Zebra Li4278 barcode scans are not registering on my computer. How can I fix this issue?
A: Make sure the scanner is in the correct mode and set to the appropriate interface (USB in this case). Check if the drivers are installed correctly on your computer. Restart your computer and scanner, and try scanning again.
3. Q: The battery of my Zebra Li4278 drains quickly. What should I do?
A: Firstly, consider replacing the battery if it is old or damaged. Make sure to charge the battery fully before use. If the issue persists, reduce unnecessary scanning and implement power-saving settings such as turning off Bluetooth when not in use. Contact Zebra customer support for further assistance if needed.
Please note that these troubleshooting steps are general recommendations, and it is advisable to refer to the product manual or Zebra's support resources for detailed instructions specific to your device and situation.
Re: Re: Download Driver Zebra Li4278
Thank you so much for sharing the link to the working Windows driver for the Zebra Li4278 device, it worked perfectly and I was able to install it without any issues.