Below you can download modem d-link dsl-2640u driver for Windows.
File name: modem-d-link-dsl-2640u.exe
Version: 5.473
File size: 44236 MB
Upload source: other website
Antivirus software passed: AVG v. 3.89
Download Driver Modem D-Link Dsl-2640U(click above to download)
Device Specification:
- Model: D-Link DSL-2640U
- Type: Modem
- Connectivity: ADSL, Ethernet
- Data Transfer Rate: Up to 24 Mbps
- Wireless Standards: IEEE 802.11b/g/n
- Wireless Security: WPA/WPA2, WEP, 64/128-bit encryption
- Antenna: 2x external detachable antennas
- Wired Ports: 4 x Ethernet Ports, 1 x ADSL Port
- USB Ports: 1 x USB 2.0
- Support for VPN Pass-Through
- Easy Setup Wizard
Troubleshooting Questions and Answers:
1. Question: Why is the wireless network not visible on my device?
Answer: There could be several reasons for this issue. First, ensure that the wireless feature is enabled on the D-Link DSL-2640U modem. Verify that the modem is not placed too far from your device, as the signal strength can weaken over distance. Check if the wireless network name (SSID) is visible, and try restarting both the modem and your device.
2. Question: Why is the DSL connection dropping frequently?
Answer: Several factors can cause frequent DSL connection drops. Ensure that all cables are securely connected to the modem and the telephone line. Check for any physical damage or loose connections in the wiring. Additionally, contact your internet service provider (ISP) to check if there are any known service outages or issues in your area.
3. Question: How can I update the firmware of the D-Link DSL-2640U modem?
Answer: To update the firmware of the D-Link DSL-2640U modem, follow these steps:
1. Visit the D-Link Support website and locate the DSL-2640U modem model.
2. Download the latest firmware file for your modem.
3. Open the modem's web-based configuration page by entering its IP address into a web browser.
4. Login using the admin credentials and navigate to the Firmware Upgrade section.
5. Select the downloaded firmware file and initiate the upgrade process.
6. Wait for the firmware update to complete and restart the modem if required.