Below you can download impressora zebra zt230 driver for Windows.
File name: impressora-zebra-zt230.exe
Version: 9.122
File size: 20.93 MB
Upload source: other website
Antivirus software passed: Kaspersky version 4.24
Download Driver Impressora Zebra Zt230(click above to download)
Device specification:
- Device: Zebra Zt230 printer
- Printer type: Direct thermal and thermal transfer printer
- Print resolution: 203 dpi (8 dots/mm)
- Maximum print speed: 6 inches/152 mm per second
- Maximum print width: 4.09 inches/104 mm
- Communication interface: USB, Serial, Ethernet
- Connectivity options: Bluetooth, Wi-Fi (optional)
- Media type: Roll-fed or fan-fold, die-cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, wristbands, and continuous or die-cut labels and synthetic labels.
Troubleshooting questions and answers:
1. Question: Why is my Zebra Zt230 printer not printing anything?
Answer: There are a few potential reasons for this issue. First, ensure that the printer is powered on and connected properly to the computer. Check if there is sufficient label or media loaded in the printer. Verify that the correct print driver is installed and selected. If the issue persists, try restarting both the printer and the computer.
2. Question: How can I resolve barcode scanning issues with my Zebra Zt230 printer?
Answer: If the barcode scanning is not working on your Zt230 printer, make sure that the barcode or label being scanned is clean and not damaged. Ensure that the barcode scanner is properly aligned with the label and within the scanning range. In case the issue continues, try adjusting the scanner sensitivity settings or contact Zebra support for further assistance.
3. Question: My Zebra Zt230 printer is displaying a "Ribbon Out" error. What should I do?
Answer: The "Ribbon Out" error indicates that the thermal transfer ribbon is not properly loaded or needs to be replaced. Open the printer's ribbon access door and confirm that the ribbon is correctly installed in the printer. If it is already installed correctly, verify if the ribbon is empty, damaged, or twisted. In such cases, replace the ribbon with a new one, ensuring proper alignment, and close the ribbon access door securely.