Download Drivers

Hi everyone,

I'm experiencing some trouble finding a driver for my Zebra Zt230 printer. I recently upgraded my operating system to Windows 10 and now my printer is not functioning properly. I've already searched on the Zebra website, but unfortunately, I couldn't find a driver specifically for Windows 10. I also tried looking on other driver download websites, but to no avail.

Could someone please provide me with a reliable source or direct link to download the driver for my Zebra Zt230 printer that is compatible with Windows 10? I would greatly appreciate any assistance! Thanks in advance.

Below you can download zebra zt230 driver for Windows.

File name: zebra-zt230.exe
Version: 5.647
File size: 20.64 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v. 5.19

Download Driver Zebra Zt230

(click above to download)


The Zebra ZT230 is a label printer designed for high-volume printing applications. Here are the specifications of this device:

- Printing Technology: Direct thermal/thermal transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: Up to 6 ips (152 mm/s)
- Maximum Print Width: 4.09" (104 mm)
- Communication Interfaces: USB, serial, parallel, and Ethernet
- Memory: 128MB RAM, 128MB Flash
- Supported Print Languages: ZPL and EPL
- Media Types: Roll-fed or fanfold, die-cut or continuous labels, tags, and receipts
- Media Width: 0.585" (15 mm) to 4.50" (114 mm)
- Media Roll Diameter: 8.0" (203 mm) on a 3.0" (76 mm) core
- Maximum Label and Liner Length: 39" (991 mm)
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Power Source: Auto-ranging power supply (input voltage range: 100-240V AC)

Troubleshooting Questions and Answers:

Q1. Why is the printer not responding when connected via USB?
A1. Ensure that the USB cable is securely connected to both the printer and the computer. Try using a different USB port or cable if the issue persists. Also, make sure the required driver is installed on the computer.

Q2. Why is the print quality poor or faded?
A2. Check the print head for any debris or residue that may be obstructing the thermal transfer process. Clean the print head using an approved cleaning solution if necessary. Additionally, ensure that the correct print darkness setting is selected.

Q3. Why is the printer not feeding labels properly?
A3. Verify that the label roll is properly inserted and aligned with the media guides. Adjust the tension and position of the label roll if needed. Also, check if the sensor is detecting the label gaps correctly, and adjust the media sensors accordingly.

Thank you so much for providing the link to download the Zebra Zt230 driver, it worked perfectly and saved me a lot of time and frustration!