Below you can download bluetooth windows 8 dell inspiron 15 driver for Windows.
File name: bluetooth_win8-dell-inspiron15.exe
Version: 5.829
File size: 14.24 MB
Upload source: original install disk
Antivirus software passed: AVG version 1.19
Driver Bluetooth Windows 8 Dell Inspiron 15(click above to download)
Device Specification:
- Model: Zebra Printer GC420T
- Compatibility: Windows 7 32-bit
- Connectivity: USB, Serial, Parallel
- Print Technology: Thermal Transfer
- Print Speed: Up to 4 inches per second
- Print Resolution: 203 dpi (dots per inch)
- Media Types: Roll-fed or fan-fold, die-cut or continuous direct thermal labels with or without black mark, tag stock, continuous receipt paper, wristbands
- Media Sizes: 1.00" to 4.25" (width), 0.38" to 39" (length)
- Memory: Standard 8 MB SDRAM, 8 MB Flash
- Power: Auto-switching 100-240V power supply
- Dimensions: 6.75" (H) x 7.5" (W) x 8.25" (D)
- Weight: 3.09 lbs
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GC420T not printing anything?
A: There could be several reasons behind this issue. First, ensure that the printer is properly connected to the computer via a USB, serial, or parallel cable. Additionally, make sure that you have installed the correct printer driver for your Windows 7 32-bit system. Check the printer's power and paper supply, ensuring that the media is loaded correctly and is within the supported sizes. If the issue persists, try performing a printer calibration or consult the printer's user manual for further troubleshooting steps.
2. Q: The printed labels from my Zebra GC420T are blurry. How can I fix this?
A: Blurry or low-quality prints can be caused by various factors. Start by checking the print head and cleaning it if necessary. Ensure that the printhead is properly aligned with the label stock and not too far away from it. Adjust the darkness or contrast settings in the printer driver configuration to optimize the print quality. If the issue persists, consider replacing the printhead or consult the printer's user manual for recommended troubleshooting steps.
3. Q: Why is my Zebra GC420T printer not recognized by my Windows 7 32-bit computer?
A: There could be a few reasons for this. Begin by checking the physical connections between the printer and the computer. Ensure that the USB, serial, or parallel cables are securely connected at both ends. Confirm that the printer drivers