Below you can download esp8266mod windows 10 driver for Windows.
File name: esp8266mod_win10.exe
Version: 9.191
File size: 44447 MB
Upload source: manufactuter website
Antivirus software passed: G Data 4.69
Esp8266Mod Driver Windows 10(click above to download)
Device: ESP8266MOD
Specifications:
- Esp8266Mod is a WiFi module based on ESP8266 SoC (System on a Chip).
- It utilizes the TCP/IP protocol stack, offering a complete and self-contained networking solution.
- Supports 802.11 b/g/n wireless standards.
- Can function as a standalone application processor, or as a slave device connected to a host MCU (Microcontroller Unit) through AT commands.
- Operating Voltage: 3.0-3.6V.
- Maximum Current Consumption: 300mA.
- Transmit Power: 802.11b: +19.5dBm, 802.11g: +18.5dBm, 802.11n: +15.5dBm.
- Dimensions: 14.0mm x 13.2mm x 2.2mm.
Troubleshooting Questions and Answers:
1. Q: Why is the ESP8266MOD not connecting to my WiFi network?
A: Ensure that the correct WiFi SSID and password are provided in the code or via AT commands. Check if the network is functioning properly, and verify that the signal strength of the network is within range.
2. Q: How can I update the firmware of the ESP8266MOD?
A: Download the latest firmware version from the manufacturer's website. Connect the ESP8266MOD to a computer using the appropriate programming interface, such as UART or USB-TTL. Use a firmware flashing tool compatible with the ESP8266MOD and follow the instructions provided by the manufacturer to update the firmware.
3. Q: Why is my ESP8266MOD module not responding to AT commands?
A: Double-check the serial communication settings, such as baud rate, data bits, parity, and stop bits, to ensure they match the settings used by the host MCU or serial terminal program. Verify that the ESP8266MOD pins are correctly connected to the host MCU or USB-TTL adapter. Ensure that the ESP8266MOD is powered and running the appropriate firmware version that supports AT command functionality.