Download Drivers

Hi everyone,

I recently upgraded my operating system to Windows 10 and my Jbl Go 2 Bluetooth speaker is not working properly. I suspect that it may be due to outdated drivers. I have searched extensively on the official Jbl website, as well as other driver update websites, but couldn't find a driver specifically for Windows 10. Can anyone please provide me with a direct link to download the Windows 10 driver for Jbl Go 2? Any assistance would be greatly appreciated. Thank you!

Below you can download jbl go 2 windows 10 driver for Windows.

File name: jbl-go2_win10.exe
Version: 1.665
File size: 34578 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v 5.13

Jbl Go 2 Driver Windows 10

(click above to download)


Device Specification:

- Brand: JBL
- Model: GO 2
- Compatibility: Windows 10
- Driver Type: Portable Bluetooth Speaker
- Connectivity: Bluetooth v4.1
- Output Power: 3 Watts
- Frequency Response: 180Hz - 20kHz
- Signal-to-Noise Ratio: ≥80dB
- Battery: Lithium-ion Polymer (up to 5 hours of playtime)
- Dimensions: 71.2mm x 86.0mm x 31.6mm
- Weight: 184 grams
- Waterproof Rating: IPX7
- Available Colors: Black, Blue, Champagne, Cyan, Gray, Red

Troubleshooting Questions and Answers:

1. Q: Why is my JBL GO 2 not connecting to Windows 10?
A: Ensure that Bluetooth is enabled on your Windows 10 device and that it is in discoverable mode. Also, make sure the speaker is in pairing mode (blinking blue light). If the issue persists, try deleting any existing JBL GO 2 device from your device's Bluetooth settings and then try to pair again.

2. Q: Why is the sound quality of my JBL GO 2 distorted?
A: Check if the speaker is paired properly with your Windows 10 device and that it is within the optimal Bluetooth range. If the issue persists, try turning off any nearby Wi-Fi routers or other devices that may cause interference. Additionally, make sure the speaker's volume level is not set too high, as it may result in distortion.

3. Q: Why is my JBL GO 2 not charging?
A: Make sure you are using the provided USB cable or one that is compatible with the speaker's charging port. Ensure that both ends of the cable are securely connected, both to the speaker and the power source. If the issue persists, try using a different USB cable or power source to eliminate any potential faults.

Thank you so much for sharing the link to the working Windows driver for the JBL Go 2, it worked perfectly on my Windows 10 system!