Below you can download usb 2.0 rs232 converter driver for Windows.
File name: usb20-rs232-converter.exe
Version: 3.515
File size: 22068 MB
Upload source: other website
Antivirus software passed: Norton 1.23
Download Driver Usb 2.0 Rs232 Converter(click above to download)
- Device Name: USB 2.0 RS232 Converter
- Interface: USB 2.0
- Connector Type: RS232
- Compatibility: Compatible with devices that have RS232 serial ports
- Transfer Speed: Supports data transfer rates up to 480 Mbps
- Power Supply: Powered via USB connection
- Operating System Support: Compatible with Windows, Mac, and Linux
- Driver Requirement: Requires download and installation of specific USB 2.0 RS232 Converter driver
Troubleshooting questions and answers:
1. Q: Why is my USB 2.0 RS232 Converter not being recognized by my computer?
A: This issue could be caused by a faulty USB cable or a missing driver. Try connecting the converter with a different USB cable and ensure the appropriate driver is installed on your computer.
2. Q: I have installed the USB 2.0 RS232 Converter driver, but my device still doesn't communicate with the connected RS232 device. What could be the problem?
A: Firstly, check the RS232 device for any issues such as incorrect settings or faulty cables. Also, verify the baud rate and other transmission settings on both the converter and the RS232 device are correctly configured. If the problem persists, try restarting the computer and reconnecting the converter.
3. Q: Every time I plug in my USB 2.0 RS232 Converter, I receive an error message saying "Unknown USB Device (Device Descriptor Request Failed)." What should I do?
A: This error indicates a problem with the USB connection or driver. Start by trying a different USB port on your computer. If the error persists, uninstall the currently installed driver, restart the computer, and then reinstall the USB 2.0 RS232 Converter driver from a reliable source.