Below you can download usb serial ch340 windows 10 driver for Windows.
File name: usb-serial-ch340_win10.exe
Version: 1.392
File size: 46508 MB
Upload source: manufactuter website
Antivirus software passed: F-Secure v 5.64
Driver Usb Serial Ch340 Windows 10(click above to download)
Device Specification:
- Model: Driver USB Serial CH340
- Operating System Compatibility: Windows 10
- Connectivity: USB interface
- Serial Interface: CH340 chipset
- Driver Compatibility: Supports CH340 chip driver for Windows 10
Troubleshooting Questions and Answers:
Q1: Why is my device not recognized by Windows 10?
A1: Ensure that you have installed the correct CH340 driver for Windows 10. Download the driver from a reliable source and follow the installation instructions provided. Additionally, check if the USB cable is securely connected to both the device and the computer.
Q2: Why am I unable to establish a serial connection with my device?
A2: First, verify that the correct driver for CH340 is installed on your Windows 10 system. Ensure that the device is powered on and connected to the computer via the USB cable. If the issue persists, try using a different USB port on your computer or test the device on another computer to rule out any port-related problems.
Q3: Why is the device intermittently losing connection during operation?
A3: This issue may occur due to power-saving settings on your computer. To prevent the USB port from entering a low-power mode, which might cause intermittent disconnection, follow these steps:
1. Open Device Manager in Windows 10.
2. Expand the "Universal Serial Bus controllers" section.
3. Right-click on the "USB Serial CH340" and choose "Properties".
4. In the Properties window, go to the "Power Management" tab.
5. Uncheck the option "Allow the computer to turn off this device to save power".
6. Click "OK" to save the changes.
Restart your computer for the settings to take effect and check if the intermittent connection issue is resolved.