Download Drivers

Hey there, I'm having trouble finding the driver for my HP M1005 printer. I've searched extensively on the official HP website, and also on various driver download websites, but I haven't had any luck so far. Does anyone happen to have a reliable source or a direct link to download the driver for this particular printer model? I would greatly appreciate any assistance in this matter. Thanks in advance!

Below you can download for hp m1005 driver for Windows.

File name: for-hp-m1005.exe
Version: 3.271
File size: 29465 MB
Upload source: other website
Antivirus software passed: Norton version 1.42

Download Driver For Hp M1005

(click above to download)


Device Specification:
- Device Model: HP M1005
- Device Type: Printer/Scanner/Copier
- Printer Technology: Laser
- Print Speed: Up to 14 ppm (pages per minute)
- Print Resolution: 600 x 600 dpi (dots per inch)
- Scanner Type: Flatbed
- Scanner Resolution: Up to 1200 dpi
- Copier Resolution: Up to 600 x 600 dpi
- Paper Tray Capacity: 150 sheets
- Connectivity: USB 2.0
- Supported OS: Windows, Mac

Troubleshooting Questions and Answers:

1. Q: Why is my HP M1005 printer not responding when I send a print command?
A: Please check the following:
- Ensure the printer is turned on and properly connected to the computer via USB cable.
- Make sure the printer has sufficient paper and ink/toner.
- Verify if the printer driver is correctly installed on your computer. If not, download and install the correct driver from the official HP website.

2. Q: The scanned images from my HP M1005 scanner are turning out blurry. What could be the issue?
A: Blurry scanned images may occur due to several reasons:
- Make sure the original document to be scanned is placed flat on the scanner glass without any folds or debris.
- Check if the scanner glass is clean. Use a soft, lint-free cloth to clean any smudges or marks that may affect the scan quality.
- Adjust the scanner resolution settings in the scanning software to a higher value for better image clarity.

3. Q: When making copies using my HP M1005 copier, the output is too light. How can I darken the copies?
A: To darken the copier output on the HP M1005, follow these steps:
- Press the Menu button on the control panel of the printer.
- Scroll and select the Copy Setup option.
- Adjust the Darkness or Contrast settings depending on the displayed options.
- Increase the darkness level to create darker copies and then press OK to save the settings.
- Try making a copy again to see if the output is now darker. Adjust the setting further if desired.

I appreciate the admin providing the link to the working Windows driver for the HP M1005; I was able to download and install it successfully, and it's working perfectly with my device now. Thank you!