Below you can download tl wn725n windows 7 driver for Windows.
File name: tl-wn725n_win7.exe
Version: 2.769
File size: 18.29 MB
Upload source: peer 2 peer
Antivirus software passed: Symantec ver 1.17
Download Driver Tl Wn725N Windows 7(click above to download)
Device Specification:
- Device: TP-Link TL-WN725N Wireless USB Adapter
- Compatibility: Supports Windows 7, Windows 8/8.1, and Windows 10 operating systems
- Wireless Standards: IEEE 802.11b/g/n, 2.4GHz
- Interface: USB 2.0
- Security: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Dimensions: 0.58 x 0.72 x 0.31 inches (14.9 x 18.9 x 7.1 mm)
- Weight: 0.07 ounces (2.1 grams)
Troubleshooting Questions and Answers:
Q1: Why is my TP-Link TL-WN725N not connecting to any wireless networks?
A1: Here are a few troubleshooting steps you can try:
- Ensure that the wireless adapter is securely plugged into a USB port on your computer.
- Make sure the correct drivers are installed. You can download the latest drivers from the official TP-Link website.
- Check if your computer's Wi-Fi is enabled and try connecting to different networks to rule out any network-related issues.
Q2: Why is the signal strength of my TP-Link TL-WN725N weak?
A2: If you're experiencing weak signal strength, you can try the following:
- Make sure the wireless adapter is positioned in an open area and not obstructed by objects or walls.
- Try selecting a different channel for your wireless network to reduce interference.
- Consider upgrading your router or access point to a more powerful one that supports higher speeds and a wider coverage range.
Q3: Why is my TP-Link TL-WN725N frequently disconnecting from the wireless network?
A3: If you're facing frequent disconnections, try these steps:
- Check if the USB port where the adapter is plugged in is functioning properly. Test with other USB devices to determine if the issue lies with the port.
- Update the firmware of your router or access point to the latest version.
- Adjust the power settings of the wireless adapter to prevent it from going into power-saving mode, which may cause disconnections.