Below you can download rs232 windows 10 64 bit driver for Windows.
File name: rs232_win1064-bit.exe
Version: 7.760
File size: 12632 MB
Upload source: original install disk
Antivirus software passed: Kaspersky ver. 4.52
Rs232 Driver Windows 10 64 Bit(click above to download)
The device is a RS232 driver compatible with Windows 10 64-bit operating system.
Specifications of the RS232 Driver:
- Compatibility: Windows 10 64-bit
- Interface: RS232
- Driver Type: Plug and Play
- Data Transfer Rate: Up to 115200 bps
- Supported Protocols: RS232, RS422, and RS485
- Connector Type: DB9 Male/Female
- Power Source: USB
- Dimensions: 2.4 x 1.4 x 0.5 inches
- Weight: 0.2 ounces
Troubleshooting Questions and Answers:
Q1: Why is my RS232 driver not being recognized by my Windows 10 64-bit computer?
A1: Firstly, ensure that the driver is properly connected to the computer's USB port. Try using a different USB port or cable. If the issue persists, check if the device drivers are installed correctly. Update the drivers manually or use the manufacturer's website for the latest drivers.
Q2: I am unable to establish a connection with my RS232 device. What could be the problem?
A2: Ensure that the RS232 device is properly connected to the driver's DB9 port. Check if the device is powered on and functioning correctly. Make sure you have selected the correct COM port in your terminal software. Additionally, verify that the baud rate, data bits, parity, and stop bits are correctly configured.
Q3: My RS232 driver is connecting but not transferring any data. How can I fix it?
A3: Check if the data transfer mode (RS232, RS422, or RS485) matches the protocol of your connected device. Confirm that the connected device is sending/receiving data. Test with a different software or application to eliminate any software-related issues. Verify that the cables and connectors are not faulty. If still unresolved, try using a loopback test to isolate any potential driver or device faults.