Below you can download brother mfc 7360 windows 10 64 bit driver for Windows.
File name: brother-mfc7360_win1064-bit.exe
Version: 6.279
File size: 13028 MB
Upload source: original install disk
Antivirus software passed: McAfee version 2.62
Brother Mfc 7360 Driver Windows 10 64 Bit(click above to download)
Device: Brother MFC 7360
- Type: All-in-One Laser Printer
- Connectivity: USB 2.0, Ethernet
- Printing Speed: Up to 24 pages per minute
- Resolution: Up to 2400 x 600 dpi
- Scanning Resolution: Up to 600 x 2400 dpi
- Copying Resolution: Up to 600 x 600 dpi
- Paper Handling: 250-sheet input tray, 100-sheet output tray
- Duplex Printing: Manual
- Supported Operating Systems: Windows 10 (64-bit) and various others
- Dimensions: 405mm x 398.5mm x 316mm
- Weight: 9.8 kg
Troubleshooting Questions and Answers:
Q1: Why is my printer not responding when connected to my computer?
A1: Ensure that the USB or Ethernet cable is securely connected to both the printer and the computer. Try using a different cable or port if the issue persists. Also, ensure that the printer driver is properly installed on the computer.
Q2: Why am I getting poor print quality from my Brother MFC 7360?
A2: Firstly, check if the toner cartridge is properly installed and has sufficient toner. If low on toner, replace the cartridge. Additionally, ensure that the paper used meets the recommended specifications and is not wrinkled or damaged. Clean the printer's print head and perform a print head alignment if necessary.
Q3: Why am I experiencing paper jams frequently in my Brother MFC 7360?
A3: Paper jams can occur due to various reasons. Start by ensuring that the paper is loaded correctly in the input tray and is not exceeding the specified paper capacity. Check for any torn or wrinkled paper inside the printer. Clean the paper feed rollers and separation pad to improve paper feed. If the issue persists, contact Brother customer support for assistance.