Below you can download blue yeti windows 10 driver for Windows.
File name: blue-yeti_win10.exe
Version: 4.367
File size: 16711 MB
Upload source: original install disk
Antivirus software passed: Symantec v 2.10
Blue Yeti Driver Windows 10(click above to download)
Device Specifications:
- Device Type: USB Condenser Microphone
- Compatibility: Windows 10
- Connectivity: USB 2.0
- Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo
- Frequency Response: 20Hz - 20kHz
- Bit Depth: 16-bit
- Sample Rate: 48kHz
- Headphone Amplifier: 3.5mm jack with volume control
- Gain Control: Adjustable
- Dimensions: 4.72 x 4.92 x 11.61 inches
- Weight: 3.51 lbs
Troubleshooting Questions and Answers:
Question 1: Why is my Blue Yeti microphone not being recognized by my Windows 10 computer?
Answer: Please ensure that you have installed the necessary Blue Yeti driver for Windows 10 from the official Blue Microphones website. Additionally, try using a different USB port or cable to ensure a proper connection.
Question 2: How can I resolve audio distortion or poor sound quality with my Blue Yeti on Windows 10?
Answer: Firstly, make sure that the microphone's gain control is not set too high, as it can cause distortion. Adjust it accordingly. Also, check the recording settings on your computer's sound control panel and ensure that the microphone is set as the default input device. If the issue persists, try using the microphone with another computer to isolate the problem.
Question 3: Why is there no sound coming through my headphones when using the Blue Yeti microphone on Windows 10?
Answer: Verify that your headphones are properly plugged into the 3.5mm audio jack on the microphone and ensure the volume control is turned up. Additionally, check the audio settings on your computer and make sure that the Blue Yeti microphone is selected as the output device. If the problem persists, test the headphones with another source to determine if they are functioning properly.