Avrisp Mkii Jungo Driver Windows 10
Avrisp Mkii Jungo Driver Windows 10
I recently upgraded to Windows 10 and I'm having trouble finding the Avrisp Mkii Jungo driver for my device. I've searched extensively on various websites and forums, but I haven't been able to locate a reliable download link. Could someone please provide me with a direct link to download the Avrisp Mkii Jungo driver compatible with Windows 10? I would greatly appreciate any assistance. Thank you in advance for your help!
Re: Avrisp Mkii Jungo Driver Windows 10
Below you can download avrisp mkii jungo windows 10 driver for Windows.
File name: avrisp-mkii-jungo_win10.exe
Version: 8.343
File size: 13.59 MB
Upload source: search engine
Antivirus software passed: Avira v. 2.58
Avrisp Mkii Jungo Driver Windows 10
(click above to download)
Device Specification:
- Device Name: Avrisp Mkii Jungo Driver
- Compatible Operating System: Windows 10
- Driver Provider: Jungo Connectivity Ltd.
- Driver Version: (specific version not provided)
- Driver Type: USB driver
- Supported Devices: AVR microcontrollers and Part 9 (AP-Note) Programmer Sticks
- Connectivity: USB 2.0
- Supported programming software: Atmel Studio, AVRDUDE, Arduino IDE, etc.
Troubleshooting Questions and Answers:
1. Q: Why is the Avrisp Mkii Jungo Driver not recognized by my Windows 10 computer?
A: Here are a few troubleshooting steps you can try:
- Ensure that the device is properly connected to the computer and powered on.
- Verify that you have installed the correct driver version for your operating system.
- Restart your computer and try reconnecting the device to a different USB port.
- Check if any antivirus or firewall software is blocking the driver installation or device recognition.
2. Q: How can I update the Avrisp Mkii Jungo Driver on my Windows 10 computer?
A: To update the Avrisp Mkii Jungo Driver, follow these steps:
- Go to the Jungo Connectivity website or the official manufacturer's website and locate the latest driver version compatible with Windows 10.
- Download the driver setup file to your computer.
- Disconnect the Avrisp Mkii device from your computer.
- Run the downloaded driver setup file and follow the on-screen instructions to install the driver.
- Once the installation is complete, reconnect the Avrisp Mkii device to your computer. Windows 10 should automatically recognize and use the updated driver.
3. Q: Why is my Avrisp Mkii Jungo Driver not working properly with Atmel Studio?
A: If you are facing issues with the Avrisp Mkii Jungo Driver and Atmel Studio, consider the following troubleshooting steps:
- Verify that you have selected the correct programmer and device settings within Atmel Studio.
- Make sure the Avrisp Mkii device is properly connected to your computer and the target device.
- Check for any firmware updates for the Avrisp Mkii device and install them if available.
- Restart both the Avrisp Mkii device and your computer, then try again.
- If the problem persists, try using alternative programming software like
File name: avrisp-mkii-jungo_win10.exe
Version: 8.343
File size: 13.59 MB
Upload source: search engine
Antivirus software passed: Avira v. 2.58
Avrisp Mkii Jungo Driver Windows 10
(click above to download)
Device Specification:
- Device Name: Avrisp Mkii Jungo Driver
- Compatible Operating System: Windows 10
- Driver Provider: Jungo Connectivity Ltd.
- Driver Version: (specific version not provided)
- Driver Type: USB driver
- Supported Devices: AVR microcontrollers and Part 9 (AP-Note) Programmer Sticks
- Connectivity: USB 2.0
- Supported programming software: Atmel Studio, AVRDUDE, Arduino IDE, etc.
Troubleshooting Questions and Answers:
1. Q: Why is the Avrisp Mkii Jungo Driver not recognized by my Windows 10 computer?
A: Here are a few troubleshooting steps you can try:
- Ensure that the device is properly connected to the computer and powered on.
- Verify that you have installed the correct driver version for your operating system.
- Restart your computer and try reconnecting the device to a different USB port.
- Check if any antivirus or firewall software is blocking the driver installation or device recognition.
2. Q: How can I update the Avrisp Mkii Jungo Driver on my Windows 10 computer?
A: To update the Avrisp Mkii Jungo Driver, follow these steps:
- Go to the Jungo Connectivity website or the official manufacturer's website and locate the latest driver version compatible with Windows 10.
- Download the driver setup file to your computer.
- Disconnect the Avrisp Mkii device from your computer.
- Run the downloaded driver setup file and follow the on-screen instructions to install the driver.
- Once the installation is complete, reconnect the Avrisp Mkii device to your computer. Windows 10 should automatically recognize and use the updated driver.
3. Q: Why is my Avrisp Mkii Jungo Driver not working properly with Atmel Studio?
A: If you are facing issues with the Avrisp Mkii Jungo Driver and Atmel Studio, consider the following troubleshooting steps:
- Verify that you have selected the correct programmer and device settings within Atmel Studio.
- Make sure the Avrisp Mkii device is properly connected to your computer and the target device.
- Check for any firmware updates for the Avrisp Mkii device and install them if available.
- Restart both the Avrisp Mkii device and your computer, then try again.
- If the problem persists, try using alternative programming software like
Re: Re: Avrisp Mkii Jungo Driver Windows 10
Thank you so much for sharing the link to the working Windows driver for the Avrisp Mkii! I've been struggling to find a compatible driver for Windows 10, and this has saved me a lot of frustration.