Below you can download konica minolta c450 vxl driver for Windows.
File name: konica-minolta-c450-vxl.exe
Version: 2.742
File size: 18415 MB
Upload source: search engine
Antivirus software passed: Kaspersky ver. 3.71
Konica Minolta C450 Vxl Driver Download(click above to download)
Device Specification:
- Device Name: Konica Minolta C450 Vxl
- Type: Multifunction Color Laser Printer
- Print Speed: Up to 45 pages per minute (ppm)
- Print Resolution: 600 x 600 dpi
- Paper Capacity: Standard 1,150 sheets, expandable to 3,650 sheets
- Print Memory: 1 GB
- Interface: USB 2.0, Ethernet, Parallel
- Supported Operating Systems: Windows, Macintosh, Linux
- Monthly Duty Cycle: Up to 150,000 impressions
- Dimensions: 23.4 x 26.2 x 33.7 inches
- Weight: Approximately 180 lbs
Troubleshooting Questions and Answers:
1. Question: Why is my Konica Minolta C450 Vxl not printing properly?
Answer: There could be several reasons for improper printing. First, check if there are any paper jams or if the paper tray is empty. Ensure the print driver settings match the paper type and size selected. If the issue persists, try calibrating the printer or updating the printer driver.
2. Question: How can I resolve a "Toner Low" error message on my Konica Minolta C450 Vxl?
Answer: When you receive a "Toner Low" message, you can try the following steps. Open the printer's front cover and remove the toner cartridge. Shake it gently from side to side to distribute the remaining toner. Reinstall the cartridge properly and close the cover. If the message still appears, it may be time to replace the toner cartridge.
3. Question: Why is my Konica Minolta C450 Vxl displaying a "Paper Misfeed" error?
Answer: A "Paper Misfeed" error typically indicates a paper jam within the printer. To resolve this, first, power off the printer and unplug it from the power source. Carefully remove any jammed paper from the specified areas, such as the input trays, output trays, fuser unit, or duplexer. Make sure no torn pieces of paper are left behind. After clearing the jam, plug in the printer and power it back on to resume normal operation.