Below you can download zebra s600 windows 10 driver for Windows.
File name: zebra-s600_win10.exe
Version: 3.192
File size: 13210 MB
Upload source: manufactuter website
Antivirus software passed: G Data 1.82
Driver Zebra S600 Windows 10(click above to download)
Specification of Driver Zebra S600 for Windows 10:
- Connectivity: USB, parallel
- Print technology: Direct thermal and thermal transfer
- Print speed: Up to 6 inches per second
- Print resolution: 203 dpi (dots per inch)
- Media type: Labels, tags, continuous, fanfold, die-cut, roll-fed
- Media width: 4.1 inches maximum
- Memory: 8 MB Flash, 4 MB RAM
- Power source: AC 120/230 V
- OS compatibility: Windows 10
- Dimensions: 11.2 x 9.4 x 17.4 inches
- Weight: 32 lbs
- Manufacturer: Zebra Technologies
Troubleshooting Questions and Answers:
1. Question: Why is my Zebra S600 not printing anything?
Answer:
- Make sure the printer is powered on and connected to the computer properly.
- Check if there are any error messages displayed on the printer's screen or the computer.
- Ensure that the printer has sufficient media loaded and that the media type and size settings are correct.
2. Question: How do I resolve a "Out of Paper" error on my Zebra S600?
Answer:
- Check if there is enough paper loaded in the media compartment and make sure it is properly aligned.
- Verify that the paper type selection matches the actual media loaded.
- Clean the paper path and sensors to remove any dust or debris that may be causing the error.
3. Question: My Zebra S600 is printing faintly. How can I fix this issue?
Answer:
- Ensure that the print head is clean and free from any residue or debris by using an approved cleaning solution.
- Adjust the darkness or heat settings in the printer driver to increase the print density.
- Check the ribbon or thermal transfer settings if applicable, and make sure it is correctly installed and not near its end of life.