Below you can download is brother ql-700 compatible with windows 10 driver for Windows.
File name: is-brother-ql-700-compatible-with_win10.exe
Version: 4.735
File size: 30164 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 3.35
Is Brother Ql-700 Compatible With Windows 10(click above to download)
Yes, the Brother QL-700 label printer is compatible with Windows 10.
Specifications of the Brother QL-700 Label Printer:
- Print Technology: Direct thermal
- Print Resolution: Up to 300 x 600 dpi
- Print Speed: Up to 93 labels per minute
- Maximum Label Width: 2.4 inches
- Interface: USB 2.0
- Compatibility: Windows and Mac OS
- Built-in Cutter: Yes
- Label Types: DK die-cut labels and continuous-length paper and film tapes
- Maximum Print Width: 2.3 inches
Troubleshooting Questions and Answers:
1. Q: My Brother QL-700 is not printing any labels. What could be the issue?
A: First, check if the printer is powered on and properly connected to the computer via the USB cable. Ensure that the printer drivers are correctly installed on your Windows 10 system. Additionally, verify that the correct label type and size is selected in the printer settings. If the issue persists, try updating the printer firmware or contacting Brother support for further assistance.
2. Q: The printed labels from my Brother QL-700 are coming out faded or illegible. How can I resolve this problem?
A: Begin by checking if the label roll is properly loaded and aligned. Make sure that the label cassette is not empty or nearing the end. Adjust the print density setting in the printer software to enhance print quality. If the issue persists, clean the thermal print head using a lint-free cloth lightly moistened with isopropyl alcohol. If none of these steps solve the problem, consider replacing the label cassette or contacting Brother support.
3. Q: The Brother QL-700 is displaying a "No Paper" error message, even though there is sufficient label stock loaded. What should I do?
A: Verify that the label roll is inserted correctly and sitting properly in the printer. Ensure that the label guides are securely holding the roll and there are no obstructions preventing smooth feeding of the labels. Reset the printer by turning it off and on again. If the issue persists, try using a different label roll to eliminate the possibility of a defective stock. In case the problem persists, it is advisable to contact Brother support for further troubleshooting or repairs.