Download Drivers

I've been searching for the driver download link for the Hp Qle2460, but unfortunately, I haven't had any luck finding it. I've spent hours browsing through various websites, including the official Hp support page, driver download forums, and even tried using different search engines, but still can't find what I need. Could someone please provide me with the direct download link or guide me to a reliable source to get this driver? I would greatly appreciate any help or suggestions. Thank you!

Below you can download hp qle2460 driver for Windows.

File name: hp-qle2460.exe
Version: 5.716
File size: 16923 MB
Upload source: search engine
Antivirus software passed: McAfee v. 3.31

Hp Qle2460 Driver Download

(click above to download)


Device Specification:
- Model: HP QLE2460
- Type: Fibre Channel Host Bus Adapter (HBA)
- Interface: PCIe x4
- Ports: Single Fibre Channel port
- Speed: 4Gbps
- Protocol: Fibre Channel (FCP-3)
- Supported Operating Systems: Windows, Linux, VMware
- Supported Standards: PCI-Express, FC-PI-2, FC-PI-3, FC-PI-4, FC-FS, FC-LS-2, FC-AL-2, FC-DA, FCP-2, FCP-3
- Form Factor: Low Profile, Half Height
- Dimensions: 6.3 x 2.5 in (16.0 x 6.4 cm)
- Weight: 0.35 lbs (0.16 kg)

Troubleshooting Questions and Answers:
1. Q: Why is the HP QLE2460 not recognized by my operating system?
A: Ensure that you have installed the correct driver for the HP QLE2460 on your system. Check the device manager to see if the HBA is listed and functioning properly. If not, try reseating the card in the PCIe slot and ensure all necessary power connections are secure.

2. Q: What can I do if the HP QLE2460 fails to establish a connection with the storage array?
A: Check the Fibre Channel cable connections between the HBA and the storage array. Ensure that the cables are securely plugged in and that there are no physical damages. Additionally, verify that the storage array is powered on and functional. Restarting the server or trying a different Fibre Channel port on the storage array might also help resolve the issue.

3. Q: Why is my data throughput significantly slower than expected with the HP QLE2460?
A: First, check if the HBA and storage array have negotiated the desired speed (4Gbps) by inspecting the link status. If not, verify that the connected devices support the desired speed and review any configuration settings that may affect the link rate. Additionally, ensure that the server and storage array have adequate system resources and are not experiencing any bottlenecks. Updating the driver and firmware for the HBA may also improve performance.

Thank you so much for providing the link to the working Windows driver for the Hp Qle2460. I've been searching for this for a while now, and I really appreciate your help!