Download Drivers

Hi everyone,

I've been searching everywhere for the driver link to download the D-Link Dfe-530Tx Rev-C1 driver, but I just can't seem to find it. I've checked the official D-Link website, as well as other popular driver download websites, but no luck so far. I've also tried searching for it on various forums and tech support websites, but still no success.

I would really appreciate if someone could provide me with a reliable driver link for the D-Link Dfe-530Tx Rev-C1. I'm currently using Windows 10, so it would be great if the driver is compatible with that. Thank you in advance for any assistance!

Below you can download d-link dfe-530tx rev-c1 driver for Windows.

File name: d-link-dfe-530tx-rev-c1.exe
Version: 3.571
File size: 14.71 MB
Upload source: search engine
Antivirus software passed: AVG v 4.96

Download Driver D-Link Dfe-530Tx Rev-C1

(click above to download)


Device Specification:
- Model: D-Link DFE-530TX Rev-C1
- Interface: PCI
- Network Standards: IEEE 802.3, IEEE 802.3u
- Data Transfer Rate: 10/100 Mbps
- Network Connectivity: Wired Ethernet
- Data Link Protocol: Ethernet, Fast Ethernet
- Supported Operating Systems: Windows 98, NT4.0, Me, 2000, XP, Vista, 7, 8, 10; Novell NetWare (ODI); Linux (Kernel 2.2 or later)
- Dimensions: 5.2 in x 2.1 in

Troubleshooting Questions and Answers:
Q1. The network connection is not working on my D-Link DFE-530TX Rev-C1. What could be the issue?
A1. There are several possible causes for this issue. Please make sure the network cable is securely connected to both the device and the router/switch. Check if the driver for the device is properly installed. Also, check if the network settings on your computer are correctly configured.

Q2. My D-Link DFE-530TX Rev-C1 is not being recognized by my computer. What should I do?
A2. First, ensure that the device is properly inserted into the PCI slot on your motherboard. If it is properly inserted and still not recognized, try reseating the device in a different PCI slot. You can also check if the driver for the device is installed correctly by going to Device Manager in the Windows Control Panel.

Q3. I have installed the driver for my D-Link DFE-530TX Rev-C1, but my computer is showing limited or no connectivity. How can I fix this?
A3. Limited or no connectivity issues can usually be resolved by troubleshooting the network settings. Firstly, verify that your network cable is undamaged and firmly connected. Next, check your IP address settings and ensure that they are set to obtain an IP address automatically (DHCP). If the issue persists, try restarting your router or switch and resetting the TCP/IP stack on your computer.

Thank you so much for sharing the link to the working Windows driver for the D-Link Dfe-530Tx Rev-C1 device, it has been incredibly helpful for me!