Below you can download realtek digital output driver for Windows.
File name: realtek-digital-output.exe
Version: 5.367
File size: 20.74 MB
Upload source: search engine
Antivirus software passed: G Data v. 4.76
Download Driver Realtek Digital Output(click above to download)
Device Specification:
Device Name: Realtek Digital Output
Manufacturer: Realtek
Model: Digital Output
Compatibility: Windows, Mac
Interface: USB 2.0/3.0
Audio Output: Digital
Supported Audio Formats: PCM, Dolby Digital, DTS
Supported Sample Rates: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Dynamic Range: 100 dB
Signal-to-Noise Ratio (SNR): 90 dB
Power Source: USB Bus-Powered
Dimensions: 6.7 x 3.3 x 1.6 inches
Weight: 0.2 pounds
Troubleshooting Questions and Answers:
1. Q: Why is there no audio output from the Realtek Digital Output?
A: Please check the following:
- Ensure that the device is properly connected to the computer via USB.
- Confirm that the device is selected as the default audio output device in the computer's sound settings.
- Verify that the volume on the Realtek Digital Output device is not muted or set to a very low level.
2. Q: Why does the Realtek Digital Output produce distorted sound?
A: If you experience distorted sound, try the following:
- Ensure that the audio cables connecting the device to the output source are securely plugged in and not damaged.
- Check if the output source is configured to an appropriate audio format and sample rate supported by the Realtek Digital Output.
- Test the device with a different computer or audio source to rule out any issues with the current setup.
3. Q: Why is the Realtek Digital Output not recognized by my computer?
A: If the device is not being recognized, try the following steps:
- Disconnect and reconnect the USB cable from both the device and the computer.
- Test the device on a different USB port to check if the issue is specific to a particular port.
- Ensure that you have downloaded and installed the proper driver for the Realtek Digital Output from the manufacturer's website.