Below you can download zebra tlp 2844-z driver for Windows.
File name: zebra-tlp2844-z.exe
Version: 9.477
File size: 33573 MB
Upload source: manufactuter website
Antivirus software passed: Panda v 5.86
Download Driver Zebra Tlp 2844-Z(click above to download)
Specifications of Zebra TLP 2844-Z:
- Printer type: Desktop thermal transfer label printer
- Printing technology: Direct thermal and thermal transfer
- Print resolution: 203 dpi (8 dots/mm)
- Print speed: Up to 4 inches per second
- Maximum print width: 4.09 inches (104 mm)
- Maximum label and liner width: 4.25 inches (108 mm)
- Memory: 8 MB SDRAM, 4 MB Flash
- Connectivity: USB, parallel, and serial interfaces
- Compatible operating systems: Windows, Mac, and Linux
- Label sensor type: Fixed reflective and transmissive sensor
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra TLP 2844-Z printer not printing anything?
A: There can be several reasons for this issue. Please check the following:
- Ensure the printer is powered on and correctly connected to your computer.
- Verify that the labels and ribbon (if used) are properly loaded.
- Make sure the correct driver is installed on your computer.
- Check if there are any error messages on the printer's display panel.
2. Q: How can I resolve issues with print quality from my Zebra TLP 2844-Z?
A: If you are experiencing problems with print quality, please consider the following steps:
- Clean the printhead and platen roller with an approved cleaning solution.
- Adjust the darkness or heat settings in the printer driver to enhance print quality.
- Ensure that you are using the appropriate label stock and ribbon for your printing needs.
- Calibrate the printer to improve print alignment and label sensing accuracy.
3. Q: My Zebra TLP 2844-Z is not recognized by my computer. What should I do?
A: If the printer is not being recognized, please try the following troubleshooting steps:
- Check the cable connections between the printer and the computer, ensuring they are securely plugged in.
- Verify that the USB, parallel, or serial port on your computer is functioning correctly.
- Restart both the printer and the computer to clear any temporary glitches.
- Install or update the necessary printer driver software for your specific operating system.
Note: For detailed troubleshooting and specific issues, please refer to the device's user manual or contact Zebra technical support.