Below you can download tvs rp 3160 for windows 7 32 bit driver for Windows.
File name: tvs-rp3160-for_win732-bit.exe
Version: 2.889
File size: 20.78 MB
Upload source: original install disk
Antivirus software passed: Avira v. 4.68
Tvs Rp 3160 Driver Download For Windows 7 32 Bit(click above to download)
Device Specification:
- Device Name: TVS RP 3160
- Compatibility: Windows 7 (32-bit)
- Driver Download Link: Available for download from official TVS website
- Print Speed: 160 mm/sec
- Print Resolution: 203 dpi
- Paper Width: 58 - 80 mm
- Interface: USB
- Power Supply: External power adapter (input: AC 220-240V, 50/60 Hz | output: DC 24V, 2.5A)
- Dimensions: 195 mm (W) x 145 mm (D) x 148 mm (H)
- Weight: 1.8 kg (approx.)
Troubleshooting Questions and Answers:
Q1: I'm experiencing slow printing speed with my TVS RP 3160. What could be the possible cause?
A1: Slow printing speed can be caused by various factors. Ensure that the printer is connected to a USB 2.0 port and not a low-power USB port. Also, check if the printer driver is properly installed and up to date. Additionally, make sure the paper used meets the recommended specifications.
Q2: My TVS RP 3160 is not printing anything. What should I do to troubleshoot this issue?
A2: First, check if the printer is powered on and properly connected to the computer via USB. Verify that the printer driver is correctly installed and set as the default printer. Ensure the paper roll is loaded correctly and has not run out. If the issue persists, try restarting the printer and the computer. If none of these steps solves the problem, consult the user manual or contact TVS customer support for further assistance.
Q3: The printer is producing faded or faint prints. How can I fix this problem?
A3: Faded prints can be due to a few reasons. Start by checking the ink levels or the quality of the thermal paper being used. Replace the ink cartridge or thermal paper, if necessary. Adjust the print density settings in the printer driver software to improve the print quality. Also, make sure the print head is clean by following the printer's maintenance instructions. If the issue persists, consider contacting TVS customer support for further guidance.