Below you can download zte mf90 for windows 10 driver for Windows.
File name: zte-mf90-for_win10.exe
Version: 8.328
File size: 28611 MB
Upload source: original install disk
Antivirus software passed: McAfee v 3.21
Zte Mf90 Driver For Windows 10(click above to download)
Device Specification:
- Brand: Zte
- Model: MF90
- Compatibility: Windows 10
- Driver: Zte MF90 Driver for Windows 10
- Supported Network Bands: 4G LTE
- SIM Card Slots: Single SIM
- Network Supported: GSM, GPRS, EDGE, UMTS, HSPA, HSPA+
- Wi-Fi Standards: 802.11 b/g/n
- Wi-Fi Features: Wi-Fi Hotspot, Wi-Fi Direct
- Download Speed: Up to 100 Mbps
- Upload Speed: Up to 50 Mbps
- Battery Capacity: 2300mAh
- Battery Life: Up to 6 hours (continuous use)
- External Interface: Micro USB Port, Micro SD Card Slot (expandable up to 32GB)
- Display: LED Indicators for Signal strength, Wi-Fi, Battery, and Data Transmission
- Dimension: 100 x 58 x 17.5 mm
- Weight: 105g
- Additional Features: SMS Support, USSD Support, Plug and Play
Troubleshooting Questions and Answers:
Q1: Why is my Zte MF90 not connecting to the internet?
A1: There could be several reasons for this issue. First, ensure that you have a valid SIM card inserted and the network coverage is good. Check if the Wi-Fi is enabled and the Wi-Fi password is correct. Also, confirm that the APN settings of your network provider are correctly configured in the device's settings.
Q2: How can I extend the battery life of my Zte MF90?
A2: To optimize the battery life, you can try the following steps: Reduce the number of connected devices to your Wi-Fi hotspot, lower the Wi-Fi signal strength if possible, disable unnecessary Wi-Fi features like Wi-Fi Direct, and turn off the device when not in use. Additionally, reducing the screen brightness and closing unused applications on your connected devices can also help conserve battery power.
Q3: My Zte MF90 is not recognized by my Windows 10 PC. What should I do?
A3: If the device is not being recognized by your computer, try the following troubleshooting steps: First, ensure that you have installed the appropriate Zte MF90 driver for Windows 10. You can download and install the driver from the official Zte website. Try connecting the device to a different USB port on your computer or try using a different USB cable.