Below you can download windows 10 usb rs232 driver for Windows.
File name: _win10-usb-rs232.exe
Version: 6.489
File size: 31168 MB
Upload source: original install disk
Antivirus software passed: Norton ver. 3.60
Driver Windows 10 Usb Rs232(click above to download)
Device Specification:
- Compatible with Windows 10.
- Connection: USB to RS232.
- Driver installation required.
- Allows communication between USB-enabled devices and RS232 serial devices.
Troubleshooting Questions and Answers:
1. Q: Why is my device not being recognized by my Windows 10 computer?
A: Make sure the correct driver for the USB to RS232 device is installed. Check the Device Manager to see if the device is listed and functioning properly.
2. Q: Why am I experiencing communication issues between my USB-enabled device and RS232 serial device?
A: Ensure that both devices are properly connected and securely plugged in. Verify that the correct settings, such as data rate and flow control, are configured on both ends for successful communication.
3. Q: What should I do if the USB to RS232 connection is intermittently dropping or disconnecting?
A: Try using a different USB port on your computer to rule out any port-related issues. Also, check the USB cable for any damages or loose connections. Updating the USB driver and restarting the system might help resolve intermittent disconnectivity problems.