Below you can download xprinter k58 driver for Windows.
File name: xprinter-k58.exe
Version: 9.594
File size: 44240 MB
Upload source: other website
Antivirus software passed: McAfee ver. 1.62
Download Driver Xprinter K58(click above to download)
Device Specification:
- Model: Xprinter K58
- Type: Thermal Receipt Printer
- Connectivity: USB 2.0/RS232 Serial Port
- Print Method: Direct Thermal Printing
- Print Speed: Up to 90mm/s
- Print Resolution: 203 dpi
- Paper Width: 58mm
- Paper Type: Thermal Paper Roll
- Paper Roll Diameter: Maximum 60mm
- Cutter Type: Manual Tear or Auto-Cutter
- Compatible OS: Windows, Linux, Android
- Power Source: DC 12V/2A
Troubleshooting Questions and Answers:
Question 1: The printer is not responding when I send a print command. What could be the issue?
Answer 1: There could be a few possible causes for this issue. Firstly, ensure that the printer is properly connected to the computer via the USB cable or serial port. Check if the printer is receiving power, and make sure it is turned on. Additionally, verify if the correct printer driver (Driver Xprinter K58) is installed on the computer. If none of these solve the issue, contact technical support for further assistance.
Question 2: The print quality is poor and the text appears faded or smudged. How can I improve the print quality?
Answer 2: To enhance the print quality, try the following steps:
- Ensure that the thermal paper roll is correctly installed and aligned in the printer.
- Check if the print head is clean. If it's dirty, gently wipe it with a lint-free cloth or a designated cleaning pen, following the manufacturer's instructions.
- Adjust the darkness or contrast settings in the printer driver software to find the optimal print quality.
- If the issue persists, it might indicate a need for a replacement print head. Contact the manufacturer or authorized service center for further assistance.
Question 3: The paper gets jammed frequently while printing. How can I resolve this issue?
Answer 3: Frequent paper jams can be caused by various reasons. To troubleshoot this issue, consider the following steps:
- Ensure that the paper roll is properly loaded and aligned. If necessary, remove any creases or folds in the paper.
- Check for any foreign objects obstructing the paper path. Remove any debris or scraps of paper if found.
- If the auto-cutter feature is enabled, disable it temporarily to see if that reduces jamming incidents.
- Make sure that the paper roll is not exceeding the maximum