Below you can download usb to serial u232-p9 driver for Windows.
File name: usb-to-serial-u232-p9.exe
Version: 5.422
File size: 35704 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 4.63
Download Driver Usb To Serial U232-P9(click above to download)
Device Specification:
- Device Type: USB to Serial Converter (U232-P9)
- Input: USB Type-A Male
- Output: RS-232 Serial Port (DB9 Male)
- Compatible OS: Windows, Linux, Mac
- Interface: USB 1.1/2.0/3.0
- Transfer Rate: Up to 230,400 bps
- Cable Length: Approximately 1.5 meters
- Supported Serial Signals: RX, TX, RTS, CTS, DTR, DSR, DCD, RI, GND
- Driver Support: Requires download of specific USB to Serial driver (U232-P9)
- Plug and Play: Yes, upon successful driver installation
- LED Indicators: Power, TX, RX
- Dimensions: 55mm x 22mm x 12 mm
- Weight: 30 grams
Troubleshooting Questions and Answers:
1. Q: Why is my USB to Serial converter not working properly?
A: There could be several reasons for this issue. First, ensure that the correct U232-P9 driver software has been downloaded and installed for your operating system. Secondly, check if the USB cable connection is secure and not damaged. Lastly, verify that your serial device is functioning correctly and supports RS-232 communication.
2. Q: I am unable to establish a connection with my serial device using the U232-P9 converter. What can I do?
A: Firstly, ensure that the serial device is powered on and properly connected to the converter's RS-232 port. Then, check if the baud rate and other serial settings match between the device and the application/software you are using. Also, verify if the serial device requires any specific handshaking signals to be configured on the converter. Lastly, try using a different USB port or restarting your computer.
3. Q: Why is my USB to Serial converter not recognized by my computer?
A: Start by checking whether you have installed the correct U232-P9 driver software for your operating system. If the driver is already installed, try connecting the converter to a different USB port on your computer. Make sure the USB port is not faulty by testing it with another USB device. If the issue persists, try uninstalling and reinstalling the U232-P9 driver, following the installation instructions provided by the manufacturer.