Page 1 of 1

Download Driver Usb Programer Ch341A

Posted: Tue Mar 02, 2021 10:09 pm
by Vicki1993
I'm having trouble finding a driver for the USB Programmer CH341A. I've searched extensively on various websites and forums, including the official manufacturer's website, but I couldn't find a direct download link. Could someone please provide me with a reliable source or direct link to download the driver? I'm running a Windows 10 operating system. Any help would be greatly appreciated. Thank you!

Re: Download Driver Usb Programer Ch341A

Posted: Wed Mar 03, 2021 12:10 am
by Detective
Below you can download usb programer ch341a driver for Windows.

File name: usb-programer-ch341a.exe
Version: 2.532
File size: 34669 MB
Upload source: other website
Antivirus software passed: McAfee v 2.90

Download Driver Usb Programer Ch341A

(click above to download)


Device Specification:
- Name: USB Programmer CH341A
- Interface: USB
- Supported Operating Systems: Windows XP, Windows 7, Windows 8, Windows 10
- Programming Voltage: 3.3V to 5V
- Supported ICs: EEPROM, SPI FLASH, AVR, PIC, etc.
- Dimensions: Length - 60mm, Width - 19mm, Height - 9mm

Troubleshooting Questions and Answers:
1. Q: Why is my USB Programmer CH341A not being recognized by my computer?
A: Firstly, ensure that you have installed the correct driver for the CH341A. You can download the driver from the official manufacturer's website. If the problem persists, try using a different USB port or cable. Additionally, check if the device is compatible with your operating system.

2. Q: How can I fix the issue of the USB Programmer CH341A not programming my IC properly?
A: Make sure that you have selected the correct programming voltage suitable for your IC. Refer to the documentation of your IC and configure the CH341A accordingly. Double-check the connection between the CH341A and the IC, ensuring that all pins are properly aligned and securely connected. If the problem persists, verify if your IC is supported by the CH341A and if you are using the appropriate programming software.

3. Q: My USB Programmer CH341A suddenly stopped working during a programming process. What should I do?
A: Firstly, check the USB connection and make sure it is not loose or disconnected. Disconnect and reconnect the USB Programmer CH341A to your computer. If the issue persists, close the programming software, unplug the CH341A, and restart your computer. After the computer boots up, plug in the CH341A and open the programming software again. If the problem still persists, try using the CH341A on a different computer to determine if the issue lies with the device or your computer.

Re: Re: Download Driver Usb Programer Ch341A

Posted: Wed Mar 03, 2021 10:43 am
by Vicki1993
Thanks for sharing the link to the driver! I'll give it a try and hopefully it'll work smoothly with my device.