Download Driver Xprinter Q80I
Download Driver Xprinter Q80I
I've been searching everywhere for the driver for my Xprinter Q80I, but I can't seem to find it. I've checked the manufacturer's website, various driver download sites, and even tried searching through forums, but no luck so far. Can anyone please provide me with a direct link to download the driver? Any help would be greatly appreciated!
Re: Download Driver Xprinter Q80I
Below you can download xprinter q80i driver for Windows.
File name: xprinter-q80i.exe
Version: 1.384
File size: 44505 MB
Upload source: manufactuter website
Antivirus software passed: G Data 5.3
Download Driver Xprinter Q80I
(click above to download)
- Printer: Xprinter Q80I
- Printer type: Thermal printer
- Connectivity: USB and Ethernet
- Print speed: 300 mm/s
- Print resolution: 203 dpi
- Printable width: 72mm
- Print method: Direct thermal
- Compatible operating systems: Windows, Linux, Android
- Paper type: Thermal paper
- Paper width: 80mm
- Paper roll diameter: Maximum 80mm
- Paper thickness: 0.06 -0.08 mm
- Cutter: Manual cutter
- Power supply: DC 24V/2.5A
- Dimensions: 200mm (W) x 140mm (D) x 150mm (H)
- Weight: 1.1 kg
- Certification: CE, FCC, CCC, RoHS
Troubleshooting Questions and Answers:
1. Q: Why is the printer not printing anything?
A: Please check the following troubleshooting steps:
- Ensure that the printer is powered on and connected to the computer properly.
- Verify that the correct printer driver is installed on the computer.
- Make sure the paper roll is loaded correctly and has sufficient paper.
- Check if the printer's status LED is indicating any errors. Refer to the user manual for troubleshooting steps specific to the LED status.
2. Q: The prints from the printer are too light, almost unreadable. What could be the issue?
A: If the prints appear faded or light, try the following steps:
- Check if the paper roll is loaded correctly. Ensure that it is inserted properly and aligned with the printing mechanism.
- Confirm that the paper roll is of the recommended thickness (0.06 - 0.08 mm) and not too thin.
- Adjust the print density settings in the printer driver or software to enhance the print quality. Refer to the user manual for instructions.
3. Q: The printer is displaying a "Paper Out" error, but there is paper loaded. How to resolve this?
A: If the printer shows a "Paper Out" error incorrectly, consider these steps:
- Ensure that the paper roll is properly inserted and not stuck. Adjust the position of the paper roll if necessary.
- Check if the paper roll has run out. Replace with a new one if required.
- Validate if the sensors in the printer are clean and functioning correctly. Clean them gently with a lint-free cloth
File name: xprinter-q80i.exe
Version: 1.384
File size: 44505 MB
Upload source: manufactuter website
Antivirus software passed: G Data 5.3
Download Driver Xprinter Q80I
(click above to download)
- Printer: Xprinter Q80I
- Printer type: Thermal printer
- Connectivity: USB and Ethernet
- Print speed: 300 mm/s
- Print resolution: 203 dpi
- Printable width: 72mm
- Print method: Direct thermal
- Compatible operating systems: Windows, Linux, Android
- Paper type: Thermal paper
- Paper width: 80mm
- Paper roll diameter: Maximum 80mm
- Paper thickness: 0.06 -0.08 mm
- Cutter: Manual cutter
- Power supply: DC 24V/2.5A
- Dimensions: 200mm (W) x 140mm (D) x 150mm (H)
- Weight: 1.1 kg
- Certification: CE, FCC, CCC, RoHS
Troubleshooting Questions and Answers:
1. Q: Why is the printer not printing anything?
A: Please check the following troubleshooting steps:
- Ensure that the printer is powered on and connected to the computer properly.
- Verify that the correct printer driver is installed on the computer.
- Make sure the paper roll is loaded correctly and has sufficient paper.
- Check if the printer's status LED is indicating any errors. Refer to the user manual for troubleshooting steps specific to the LED status.
2. Q: The prints from the printer are too light, almost unreadable. What could be the issue?
A: If the prints appear faded or light, try the following steps:
- Check if the paper roll is loaded correctly. Ensure that it is inserted properly and aligned with the printing mechanism.
- Confirm that the paper roll is of the recommended thickness (0.06 - 0.08 mm) and not too thin.
- Adjust the print density settings in the printer driver or software to enhance the print quality. Refer to the user manual for instructions.
3. Q: The printer is displaying a "Paper Out" error, but there is paper loaded. How to resolve this?
A: If the printer shows a "Paper Out" error incorrectly, consider these steps:
- Ensure that the paper roll is properly inserted and not stuck. Adjust the position of the paper roll if necessary.
- Check if the paper roll has run out. Replace with a new one if required.
- Validate if the sensors in the printer are clean and functioning correctly. Clean them gently with a lint-free cloth
Re: Re: Download Driver Xprinter Q80I
Thank you for sharing the link to the working Windows driver for the Xprinter Q80I, I really appreciate it!