Below you can download impresora zebra gk420t windows 10 driver for Windows.
File name: impresora-zebra-gk420t_win10.exe
Version: 2.689
File size: 14.46 MB
Upload source: search engine
Antivirus software passed: Symantec v 1.50
Driver Impresora Zebra Gk420T Windows 10(click above to download)
Device: Zebra GK420T Printer
Specifications:
- Model: Zebra GK420T
- Printer Type: Thermal transfer
- Print Method: Direct thermal and thermal transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Print Speed: Up to 5 inches (127 mm) per second
- Maximum Print Width: 4.09 inches (104 mm)
- Maximum Print Length: 39 inches (991 mm)
- Interface: USB, Serial, and Ethernet
- Compatibility: Compatible with Windows 10
- Dimensions: 7.6" (193 mm) H x 7.5" (191 mm) W x 10" (254 mm) D
- Weight: 4.6 lbs (2.1 kg)
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra GK420T printer not printing anything?
A: There could be several reasons for this issue. First, make sure the printer is properly connected to the power source and the computer. Check if the printer firmware is up to date. Ensure that the print head and labels are loaded correctly. Finally, check the printer settings in the software and ensure that the correct printer is selected.
2. Q: Why is my Zebra GK420T printer printing blank labels?
A: If the printer is producing blank labels, it is possible that the label roll is not correctly aligned or the labels are not loaded properly. Check if the label roll is inserted correctly and aligned properly. Make sure the labels are loaded in the correct position, and the print head is not dirty or obstructed. Additionally, check the printer software settings to ensure the correct label size and settings are selected.
3. Q: Why is my Zebra GK420T printer printing faded or faint labels?
A: Faded or faint label printing can be caused by various factors. First, check the print head and clean it if necessary. Ensure that the darkness setting is adjusted correctly in the printer software to achieve optimal print quality. Verify that the label stock being used is compatible with the printer and that it is not excessively old or damaged. If the problem persists, consider replacing the print head or consulting Zebra support for further assistance.