Below you can download printer zebra s4m driver for Windows.
File name: printer-zebra-s4m.exe
Version: 6.402
File size: 44477 MB
Upload source: original install disk
Antivirus software passed: Eset v 2.55
Download Driver Printer Zebra S4M(click above to download)
Device Specifications for Zebra S4M:
- Printer Type: Thermal transfer and direct thermal
- Maximum Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 6 ips (152 mm/s)
- Maximum Print Width: 4.09" (104 mm)
- Connectivity Options: Serial, USB, parallel ports
- Memory: 8 MB Flash, 16 MB SDRAM
- Media Sensor: Transmissive and reflective sensors
- Supported Barcode Types: Code 39, Code 128, EAN-13, UPC-A, QR Code, etc.
- Compatible Operating Systems: Windows, Linux, Mac OS
- Power Requirements: AC 100-240V, 50-60Hz
Troubleshooting Questions and Answers:
1. Question: Why is my Zebra S4M printer not printing any labels?
Answer: Firstly, ensure that the printer is powered on and connected to the computer properly. Check if the label roll is loaded correctly and the media sensor is clean. If the issue persists, try reinstalling the printer driver or contact Zebra support for further assistance.
2. Question: My Zebra S4M printer is producing faded prints. What should I do?
Answer: Verify that the print head is clean and free from debris. Adjust the darkness setting in the printer driver to a higher value if needed. Additionally, check if you are using genuine Zebra approved media, as using low-quality labels can result in faded prints.
3. Question: The Zebra S4M printer is displaying a "No Media" error message. How can I resolve this?
Answer: Firstly, confirm that the media is loaded correctly in the printer and that it meets the specified requirements (size, type, etc.). Ensure that the media sensors are not blocked or dirty. If the problem persists, calibrate the media sensors using the printer's control panel or refer to the user manual for detailed instructions.