Below you can download jbl go windows 10 driver for Windows.
File name: jbl-go_win10.exe
Version: 1.984
File size: 19.66 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 4.65
Jbl Go Driver Windows 10(click above to download)
The JBL Go is a portable Bluetooth speaker known for its compact size and powerful sound. Here are the specifications of this device:
- Connectivity: Bluetooth v4.1, 3.5mm audio jack
- Battery: Li-ion, 600mAh, up to 5 hours of playtime
- Power output: 3W
- Frequency response: 180Hz - 20kHz
- Signal-to-noise ratio: ≥80dB
- Dimensions: 82.7mm x 68.3mm x 30.8mm
- Weight: 130g
Troubleshooting Questions and Answers:
1. Q: Why is my JBL Go not connecting to Windows 10?
A: Firstly, ensure that Bluetooth is turned on both on your Windows 10 device and the JBL Go. Make sure the speaker is within range and not connected to any other device. If the issue persists, try deleting the previously paired Bluetooth device from your Windows 10 settings and then re-pairing with the JBL Go.
2. Q: Why does the sound from my JBL Go keep cutting out during playback?
A: This issue might occur due to a weak Bluetooth connection. Ensure that the JBL Go and your audio-playing device are in close proximity, as obstacles can interfere with the signal. Additionally, check if the speaker's battery is low, as a low battery can sometimes cause intermittent sound output.
3. Q: How can I factory reset my JBL Go if it's not functioning properly?
A: To perform a factory reset on the JBL Go, turn on the speaker and hold down the power button for about 3-5 seconds until the light indicator starts flashing. This process will reset the speaker to its default settings. After the reset, you'll need to pair the speaker again with your device.