Below you can download tp link lan card for windows 10 64 bit driver for Windows.
File name: tp-link-lan-card-for_win1064-bit.exe
Version: 7.997
File size: 25538 MB
Upload source: other website
Antivirus software passed: AVG v 5.6
Tp Link Lan Card Driver For Windows 10 64 Bit(click above to download)
Specification:
- Device: Tp Link Lan Card
- Driver Compatibility: Windows 10 64-bit
- Interface: PCI Express
- Speed: 10/100/1000Mbps
- Ports: Single RJ45
- LED Indicators: Link/Activity
- Power Consumption: < 4.5W
- Supported Operating Systems: Windows XP/Vista/7/8/8.1/10, Linux, and Mac OS X 10.6-10.11
Troubleshooting Questions and Answers:
1. Q: My Tp Link Lan Card is not being recognized by my Windows 10 system. What should I do?
A: First, make sure you have installed the correct driver for the Lan card compatible with Windows 10 64-bit. You can download the driver from the official Tp Link website. Once installed, try restarting your system and check if the card is detected. If the issue persists, try inserting the card into a different PCI Express slot to rule out any slot-related problems.
2. Q: I am unable to establish a stable network connection with my Tp Link Lan Card. What could be the problem?
A: Check if the LAN cable is properly connected to both ends, and ensure that the router or switch you are connecting to is functional. Verify if the network settings on your computer are correctly configured, including IP address, subnet mask, and gateway. You can also try updating the driver to the latest version for improved compatibility and stability. If the issue persists, you may want to consider testing the card on a different computer or contacting Tp Link customer support for further assistance.
3. Q: The Link/Activity LED on my Tp Link Lan Card is not lit. Does that indicate a problem?
A: If the Link/Activity LED is not lighting up, it may indicate several possibilities. First, ensure that the LAN cable is securely plugged into the card and the corresponding network device. Check if the network port on the router or switch is working by testing it with a different device. You can also try swapping the LAN cable with a known working one. If the LED still does not light up, there might be a hardware issue with the card. Contact Tp Link support for further troubleshooting or potential replacement.