Below you can download usb2.0 webcam windows 10 driver for Windows.
File name: usb20-webcam_win10.exe
Version: 4.667
File size: 13089 MB
Upload source: original install disk
Antivirus software passed: AVG ver. 2.49
Usb2.0 Webcam Driver Windows 10(click above to download)
The Toshiba B-Sa4T-T is a barcode label printer that offers reliable and high-quality printing for various applications. Here are the specifications of this device:
- Printing technology: Thermal transfer and direct thermal printing
- Print resolution: 203 dpi (8 dots/mm)
- Print speed: Up to 6 inches (152.4 mm) per second
- Maximum print width: 4.09 inches (104 mm)
- Interface options: USB 2.0, RS232C, parallel, or LAN
- Memory: 16 MB RAM and 2 MB flash memory
- Media type: Roll or fanfold (paper or thermal paper labels)
- Media width: 1.57 to 4.57 inches (40 to 116 mm)
- Media thickness: 0.0059 to 0.01 inches (0.15 to 0.25 mm)
Troubleshooting Questions and Answers:
1. Q: Why is my Toshiba B-Sa4T-T not printing anything?
A: Firstly, check if the printer is properly connected to the power source and turned on. Ensure that the print head is not jammed or dirty. Verify if the correct media type and size are being used. Check the printer settings and make sure the correct driver is installed on your computer.
2. Q: The printed labels from my Toshiba B-Sa4T-T are faded. How can I fix this issue?
A: Faded labels can be a result of low print head temperature or low print density settings. Ensure that the print head temperature is set correctly as per the media being used. Adjust the print density settings from the printer driver or software. If necessary, clean the print head using a clean cloth and isopropyl alcohol.
3. Q: The Toshiba B-Sa4T-T is showing a "media out" error constantly. What should I do?
A: Firstly, check if there is any media loaded in the printer. Ensure that the media is properly positioned and aligned in the media holder. If the media is present, check if it is correctly detected by the printer. Verify if the media sensor is clean and properly functioning. If the issue persists, try reloading the media or restarting the printer.