Below you can download gigaware usb to serial software driver for Windows.
File name: gigaware-usb-to-serial-software.exe
Version: 8.581
File size: 11232 MB
Upload source: peer 2 peer
Antivirus software passed: AVG v 3.92
Gigaware Usb To Serial Driver Software Download(click above to download)
Device Specification:
- Name: Gigaware USB to Serial Adapter
- Compatibility: Windows operating system (XP, Vista, 7, 8, 10)
- Connectivity: USB 2.0
- Converters: RS232 to USB
- Data Transfer Rates: up to 250Kbps
- Chipset: Prolific PL-2303
- Cable Length: 6 feet (1.8 meters)
- Supported Devices: Modems, PDAs, GPS devices, barcode scanners, serial printers, and more
- Power: Draws power from the USB bus, no external power supply required
- Status LED: Indicates device connectivity and data transfer
Troubleshooting Questions and Answers:
1. Q: Why is my Gigaware USB to Serial Adapter not being recognized by my computer?
A: There could be several reasons for this issue. First, ensure that you have installed the correct driver software for the adapter. Download it from a reliable source and install it on your computer. If the issue persists, try using a different USB port or cable. It's also recommended to check if the adapter is compatible with your specific operating system.
2. Q: My Gigaware USB to Serial Adapter connects successfully, but I'm unable to establish communication with my device. What should I do?
A: This issue may arise due to incorrect settings or configuration. Double-check the device settings and make sure you have selected the correct serial port in the software you are using to communicate with your device. Additionally, ensure that the baud rate, parity, and other communication parameters match those required by your device. If the settings are correct and the issue persists, try using the adapter with a different device or software to identify if the problem lies with the adapter or the specific device/software combination.
3. Q: After successfully using my Gigaware USB to Serial Adapter for a while, it suddenly stopped working. What could be the cause?
A: There are a few potential causes for this problem. Start by checking the connection between the adapter and your computer or device. Ensure that the cable is securely plugged in on both ends. If the connection seems fine, try restarting your computer and reconnecting the adapter. Sometimes, conflicts with other installed software or drivers can cause the adapter to stop working. If the issue persists, you may need to uninstall and reinstall the driver software or update it to the latest version.