Download Drivers

Hi there,

I've been searching high and low for the driver for my Modem D-Link DSL-2730U but I seem to be coming up empty-handed. I've checked the official D-Link website and various other sources, but I can't seem to find a reliable download link. Does anyone here have any insights on where I could find this specific driver? I'm really in need of it as my modem is not functioning properly without it. Thanks in advance for any help!

Below you can download modem d-link dsl-2730u driver for Windows.

File name: modem-d-link-dsl-2730u.exe
Version: 3.103
File size: 13.32 MB
Upload source: original install disk
Antivirus software passed: AVG ver 4.93

Download Driver Modem D-Link Dsl-2730U

(click above to download)


Device Specification:

Device Name: D-Link DSL-2730U
Manufacturer: D-Link
Device Type: Modem
Model Number: DSL-2730U
Input: Download Driver Modem D-Link DSL-2730U
Output: N/A (as the device is a modem)

Troubleshooting Questions and Answers:

Q1: Why is my D-Link DSL-2730U modem not connecting to the internet?
A1: There could be various reasons for this issue. Firstly, check if the modem's power and DSL indicators are solid green. If not, ensure all cables are properly connected. Reboot the modem and wait for it to establish a connection. If the problem persists, contact your internet service provider for further assistance.

Q2: How can I reset the D-Link DSL-2730U modem to its factory defaults?
A2: To reset the modem, locate the reset button on the back panel of the device. Using a pointed object, press and hold the reset button for about 10 seconds until the device restarts. After the reset, the modem's settings will be restored to the factory defaults.

Q3: How do I update the firmware of the D-Link DSL-2730U modem?
A3: To update the modem's firmware, visit the official D-Link website and navigate to the support section. Download the latest firmware version compatible with your DSL-2730U model. Access the modem's web-based interface by typing its IP address in a web browser. Login using the default credentials (usually admin/admin) and navigate to the firmware upgrade section. Browse and select the downloaded firmware file, then start the upgrade process. Ensure a stable internet connection during the firmware update and avoid interrupting the process.

Thank you so much for sharing the link to the working Windows driver for the D-Link DSL-2730U modem, I really appreciate it!